Mogul Steam Locomotive
1 Attachment(s)
I decided it was time I made a model from scratch with no imput from tutorials ect.
I wanted to do a vehicle that was different from a car so ambitiously chose a steam Locomotive, I have to say that getting reference for this perticular loco was really difficult, but I have pieced it together using various photos and other references. I still have lots to model but decided to give you guys a preview. I am struggling to model the wheel linkages and pistons right now. anyway here it is : |
1 Attachment(s)
and from the front :)
|
1 Attachment(s)
And before you ask here a wireframe ..lol
|
heeeeeeey dude!! this is going to be gooooood!! keep this thing up man! really nice job sofar... and oh ...could you perhaps post a wire ? :p
|
Thanks man ..gonna be a lot of detailing on this one ..looking forward to have a go at animating it too when it is all done and dusted :)
|
the proportions dont look quite right to me
what ref did you use? |
Coming along very nicely!!! Looking forward to seeing it's progress! Good job!! :)
|
cracker ...it is modeled froma blue print and the proportions are correct, it might be the angle of the render tho.
I obviously have a lot more to add to it and maybe when the wheels are complete and the detailing is done on the boiler and the front end is added it will look more proportioned. Thanks Mainline ...will try and post an update soon, but modeling the wheel linkages and piston gear is proving to be a challenge..lol |
1 Attachment(s)
Heres a pic of the train . not quite the same but the right model.
This very simular to what mine should look like when done :) |
Cool. I havn't seen a lot of train models on SM. Great job so far mate!
|
Neat stuff. I think the long cylinder might be a bit too long, compared to your reference, but if you're going for, like, a suped-up version, it works.
|
Thanks Mike , I am not actually using the pic as a proportional reference but more of a contruction reference . I have a 2d blue print of the side and rear of the train to get the length and width but I have to use what images I could find of the same model of the train but not exact to the blueprint I have so I could figure out what the componnents were and how they relate to the 2d image.
It is proving to be a challenge with out a front or top view but it matches well to the two 2d images I have. I worked on it a little more but not much to post yet so I will wait a little while before posting an update. I do plan to animate it eventually so I am trying to model it as best I can with that in mind. |
goood for you jsprogg!
It's nice to see someone really putting his best in his project! I know for sure that this will be as great as you have in mind :) keep it rollin' dude |
update
1 Attachment(s)
Hi , been working a little more on this and will post a render later today :)
For now here is a side render with the reference overlay for your viewing pleasure .... |
1 Attachment(s)
Hi..I have added the front light and the bell, also added the boiler straps and been working for hours on the pistons and drive gear..still lots to be done on the wheels but hears an update :)
|
1 Attachment(s)
and from a different angle :
|
dude! you're rockin! You did this by yourself!! Im proud of ya boy! I like the update alot! you really worked your *ss of didn't ya...
;) |
Hi jsprogg,
your train is looking great. Keep up the progress!! |
Thanks guys :)
soreel did you model the train in your animation and most importantly how did you animate the wheel and piston motion ? I do plan to animate this train eventually when finished but the thought of keeping piston and rods and wheels in sync is a bit scarey..lol |
Looks great mate!
|
1 Attachment(s)
Thanks Peltra ...he's an update of the undercarriage.
still lots to do and it's getting complicated and crowded ..hehe. this is a rendered wire.. and i did notice that not all the wire is visible on the render mostly because I didn't want to set the normals to hard at this time , but you can still get the idea.I will try and post a full train render as soon as I finish the undercarriage. as always C & C welcome :) |
Hey Jsprogg
Well done, thats a refreshing model to see!! _J |
Very nice!!! love the detail!! and yes I modeled the train. I used MEL expressions to animate the wheels - the idea is to be able to move the train and the wheels move on their own including the pistons.
will save you headaches when you get to the animation - you don't have to key frame every single frame - all you key is the train. everything else is linked as a child or a group. |
1 Attachment(s)
Hi Guys ..as promised heres an update of my progress.
Take no notice of the textures or colours as they are just a guide for me to work by. As always C& C welcome :) |
looks all steamy to me!! ;)
|
Hey jsprogg!! Looking really good!!! It is definately coming along nicely!! Keep it up man!! :)
|
Hey,
Just for fun, here's a train engine I did that never got textured. I also had it setup to move the wheels automagically, but with driven keys, as I find you don't have to spend time trying to find out the right equation, and I had so many "joints". http://www.internetexcitement.com/ca...mages/TREN.jpg sj |
1 Attachment(s)
Started doing some more work on my train :)
|
good for you! ;)
|
Man, I missed seeing this one.
This is turning out beautifully! Dave |
thanks swankyMonkey, it's getting kinder difficult at the moment as I only have back and side view references.I am working on all the linkages and various parts under the train and the only breakdown I could find of how it all works and fits together is from a web site of a guy that built a quarter scale replica for real ..lol
So I have about 60 pics of the parts he made and I am trying to relate those parts to various photos and my image planes to fit it all together, it's little tedious but I am getting there slowly. |
Just found this thread! Good work.
|
Its looking great! how did you render it in wireframe?
|
Thanks t3 and Billy.
Those perticular renders were done with Maya's vector renderer, you have to harden all the normals to get the edges to show and if you look carefully not all of them are visable, with a little tweaking you could solve this but as a wip post I didn't really bother, it's a nice effect though. |
This is looking very nice. I saw the link from the one thread in the challenge. Nice job.
|
thanks Joed..I guess I should finish this sometime ...hehe
|
Hey man great work!!!
I have always been a fan of steam engines and this one is really comming along nicely keep up the good work Leland Webb Webb Creative Arts |
I would love to see you do some post work on one of those images. To give it the 1800's, black and white, nostalgic look and feel.
VD |
hi jsprogg,
did you ever finish your train? how did it turn out? |
Yes, I just noticed this thread myself (and I'm a train nut)! Do let us know how it all came out!
|
All times are GMT. The time now is 07:14 PM. |
Powered by vBulletin® Copyright ©2000 - 2024, Jelsoft Enterprises Ltd.
Simply Maya 2018