Maya 2020 fundamentals - modelling the real world
Get halfway through a model and find it's an unworkable mess? Can't add edge loops where you need them? Can't subdivide a mesh properly? If any of this sounds familiar check this course out.
#
1
23-05-2009
, 04:36 AM
Registered User
Join Date: May 2009
Join Date: May 2009
Posts: 6
Weird targa alpha thing...
I don't want this to happen when I get this object ready to use in the 3D game, I didn't reverse the normals or anything, I just made two flat planes for the roof and a flat plane for the front of the house, and the textures will float ontop of the roof texture, but if i move the house texture towards the center, roof texture will appear normally. This will happen as well if I create a flat triangle, extrude it, apply the texture, the house texture will still appear on top.
Is this going to display normally and it's just some video card memory limitation???
Please help.:hug:
#
2
23-05-2009
, 09:34 AM
Maniacal boy king of Babylon
Join Date: Aug 2005
Join Date: Aug 2005
Location: the netherlands
Posts: 1,605
My website;
https://www.eyellem.com
LinkedIn:
https://www.linkedin.com/pub/martin-van-stein/42/a81/b82
Yoda post;
https://forum.simplymaya.com/showthre...highlight=yoda
Indiana Jones Post;
https://srv01.simply3dworld.com/showt...threadid=29188
#
3
23-05-2009
, 06:53 PM
Registered User
Join Date: May 2009
Join Date: May 2009
Posts: 6
Well I'm using a nvidia 9400GT with drivers I've downloaded from nvidia's website. I haven't tried the quality settings with the viewports, but will reply back as soon as I try it out.Originally posted by mastone
What is your videocard and which driver do you use, does it change when you set the quality to high in the viewport and in the attr of the shadingnode
#
4
23-05-2009
, 08:00 PM
Maniacal boy king of Babylon
Join Date: Aug 2005
Join Date: Aug 2005
Location: the netherlands
Posts: 1,605
Yeah but sometimes the newest drivers don't work that well with some of your applications , search for Maya system requirements on Google.
My website;
https://www.eyellem.com
LinkedIn:
https://www.linkedin.com/pub/martin-van-stein/42/a81/b82
Yoda post;
https://forum.simplymaya.com/showthre...highlight=yoda
Indiana Jones Post;
https://srv01.simply3dworld.com/showt...threadid=29188
#
5
24-05-2009
, 12:15 AM
Registered User
Join Date: May 2009
Join Date: May 2009
Posts: 6
Okay, so I downloaded the qualified graphics pdf and it's only showing the Quadro compatible cards and not the basic consumer cards. So it's possible that I'm modeling fine within Maya, it's just the video card is not displaying it properly?Originally posted by mastone
" Well I'm using a nvidia 9400GT with drivers I've downloaded from nvidia's website."
Yeah but sometimes the newest drivers don't work that well with some of your applications , search for Maya system requirements on Google.
___edit___
Okay , so I changed the viewport quality to HIGH and created two models, one has the the alpha targa, and so does the other(just to show as an example).
The first picture shows you the textures displaying properly, the second picture shows the texture appearing ontop and the third shows you where the model is located in 3D space.
Between shot one and two, all I'm doing is rotating the view port, I'm not changing the position of the models themselves... Could this be a sign of some video card incompatibility?
Here's a video i took as well...
Video of what I'm experiencing
Screen Shot 1
Screen Shot 2
Screen Shot 3
Last edited by groovdafied; 24-05-2009 at 12:49 AM.
#
6
24-05-2009
, 01:07 AM
Super Moderator
Join Date: Dec 2006
Join Date: Dec 2006
Location: South FL
Posts: 3,522
#
7
24-05-2009
, 02:07 AM
Registered User
Join Date: May 2009
Join Date: May 2009
Posts: 6
Well if that's so, then that is a major relief, because I wasn't sure if I was doing something wrong. I will search for the driver when I get home...Originally posted by GecT
Consumer cards work fine more often than not, a lot of people use them for 3D related tasks, I know my 8800 is hanging tough lol :p. This does look video card related, try an old driver.
#
8
24-05-2009
, 02:25 AM
Registered User
Join Date: May 2009
Join Date: May 2009
Posts: 25
I would say that this is a video card issue, nothing to do with what you do in Maya. Personally I can not use Highquality texture rendering in the persp window because of my inferior graphic card.Originally posted by groovdafied
Well if that's so, then that is a major relief, because I wasn't sure if I was doing something wrong. I will search for the driver when I get home...
Seriously, I wouldn't even blame your card, its an okay card that can do most, this simple is an unfortunate incident with a glitch that maybe, ir maybe not, AW would solve eventually.
Try other drivers, old, new anything, just test around, some of them should work else your accept it, nothing really terrible, could just switch to run wireframe if you get annoyed
#
9
24-05-2009
, 03:34 AM
Registered User
Join Date: May 2009
Join Date: May 2009
Posts: 6
I thought the same thing, it's not annoying me now, but it would have annoyed me if I needed to fix my models lolOriginally posted by lillsnopp
I would say that this is a video card issue, nothing to do with what you do in Maya. Personally I can not use Highquality texture rendering in the persp window because of my inferior graphic card.
Seriously, I wouldn't even blame your card, its an okay card that can do most, this simple is an unfortunate incident with a glitch that maybe, ir maybe not, AW would solve eventually.
Try other drivers, old, new anything, just test around, some of them should work else your accept it, nothing really terrible, could just switch to run wireframe if you get annoyed
Thank you all for your input!!!
Posting Rules Forum Rules
Similar Threads
can't map alpha of file to projection node
by Darkware in forum Maya Materials & Textures replies 1 on 25-08-2006
alpha channels
by pbman in forum Maya Basics & Newbie Lounge replies 8 on 22-01-2006
avi. to targa
by dobyfred in forum Maya Basics & Newbie Lounge replies 10 on 21-01-2006
weird thing on move tool
by pbman in forum Maya Basics & Newbie Lounge replies 2 on 20-12-2005
Alpha Channels
by Joebo3 in forum SimplyMaya Tutorials replies 0 on 25-07-2005
Topics
Free Courses
Full Courses
VFX News
How computer animation was used 30 years ago to make a Roger Rabbit short
On 2022-07-18 14:30:13
Sneak peek at Houdini 19.5
On 2022-07-18 14:17:59
VFX Breakdown The Man Who Fell To Earth
On 2022-07-15 13:14:36
Resident Evil - Teaser Trailer
On 2022-05-13 13:52:25
New cloud modeling nodes for Bifrost
On 2022-05-02 20:24:13
MPC Showreel 2022
On 2022-04-13 16:02:13