Integrating 3D models with photography
Interested in integrating your 3D work with the real world? This might help
# 1 26-08-2004 , 09:41 AM
Subscriber
Join Date: Jun 2003
Location: Glasgow
Posts: 62

Pc upgrade

I am looking to upgrade my pc and wondered if any of you would have any advice on what to get?

At the moment I have the following:

AMD Athlon 2200+ 266MHz FSB (1.81GHz)
1Gb RAM
30Gb + 40Gb hard drives
NVIDIA GeForce4 MX 440
Gigabyte G7VAXP motherboard

# 2 26-08-2004 , 10:02 AM
kbrown's Avatar
Moderator
Join Date: Sep 2002
Location: London, UK
Posts: 3,198
I'd start from the video card...

I just ordered a GeForce 6800 GT 256MB card for myself user added image


Kari
- My Website
- My IMDB

Do a lot, Fail a lot and Learn a lot!
# 3 26-08-2004 , 10:14 AM
Subscriber
Join Date: Jun 2003
Location: Glasgow
Posts: 62
Will an upgrade to the graphics card you mentioned, make a large difference?

I see this card is around £250.

What do you think of the GeForce 5900XT 128Mb which is around £120?

# 4 26-08-2004 , 10:44 AM
kbrown's Avatar
Moderator
Join Date: Sep 2002
Location: London, UK
Posts: 3,198
the XT cards (nvidia ones) are lower performance budget cards just like the MX series you got... i personally wouldn't get it...


Kari
- My Website
- My IMDB

Do a lot, Fail a lot and Learn a lot!
# 5 26-08-2004 , 10:47 AM
Subscriber
Join Date: Jun 2003
Location: Glasgow
Posts: 62
What about the rest of the spec?

# 6 26-08-2004 , 11:04 AM
Subscriber
Join Date: May 2004
Posts: 233
unless you are willing to change the MB and CPU, there isnt much to change except the video card that will make any noticable performance gain.

And the 6800GT is viewed as the best performance/price card availlable from what I have seen on various forums.

# 7 26-08-2004 , 02:12 PM
Subscriber
Join Date: Jun 2003
Location: Glasgow
Posts: 62
I would be willing to change the motherboard and CPU.

Would you advise a Pentium or AMD and what speed?

Any other suggstions of improvement would be appreciated?

# 8 26-08-2004 , 02:35 PM
Subscriber
Join Date: May 2004
Posts: 233
Get a board dual CPU capable and get an AMD Opteron. Start with just a single proc and get the second one when you have the cash for it.

HD: pick a WD Raptor, put them in RAID 0 if you want to over do it

These are massive upgrade but totaly worth the cost.

# 9 26-08-2004 , 03:02 PM
Subscriber
Join Date: Jun 2003
Location: Glasgow
Posts: 62
Thanks for all of the advise.

Mantat, what spec of pc have you got?

I am only at university, would an upgrade of your suggestion now be too large?

# 10 26-08-2004 , 03:23 PM
Subscriber
Join Date: May 2004
Posts: 233
I dont have a PC, I am on a mac ;-)

And yes, these are pro level upgrades (except the video card). I think that even Kurt is not going to go to such settings. But you asked for it ;-)

If you want to spend under 500$, just a video card upgrade should be fine and help a lot for modeling. If you have problem with render time, you can always buy a cheap computer (fast CPU, 1gig ram, small HD, no video) to serve as a render node.

If you want to invest more than 1k$, the opteron option will give you the best yeild but you would still be stuck with the same video card unless you upgrade that too.

Just think about it this way: pro machine are using dual proc, high end video card, RAID HD, fast HD and lots of ram. These system can cost over 5000$ but you can get about 80% of their performance for about 2000$ by always taking the most cst effective part.

Posting Rules Forum Rules
You may not post new threads | You may not post replies | You may not post attachments | You may not edit your posts | BB code is On | Smilies are On | [IMG] code is On | HTML code is Off

Similar Threads