Video0157.zip (282.0 KB, 154 views)
bullet1968
"A Darkness at Sethanon", a book I aspire to model some of the charcters and scenes
#
2
06-03-2011
, 08:47 PM
Lifetime Member
Join Date: May 2003
couldn't grok much from the video but I'll give ya the basics ....
1. wood prep: 80/100/120 is good for removal of old surface materials, once finished wipe all pieces with either water or denatured alcohol and let dry (longer if you use water)
this will clean wood and also raise the grains.
Once dry, resand using 180/220 to remove scratches and marks left by rougher paper
wipe again with either water or denatured alcohol and let dry.
With furniture, never have sharp edges/corners, especially with children, so either do a bevel or a round over (1/8" or 1/4" would be enough)
finish: you can stain, or not , depends your preference......
if using a solvent base stain (alcohol/petroleum) you need to let pieces dry and air out for 36-48 hours to get rid of solvent gases, else the gases will blister your varnish/finish
and the gases would also be bad for newborn/children...
There are food safe stains and oils out there, used on salad bowls, etc)
I would strongly suggest looking for those brands/products at local woodworking/hobby shop.
Most food safe oil finishes last longer than varnish/shellac/lacquer, more durable, and easier to reapply as time demands.
Also, they will give the wood a richer colour, negating the need for stains unless you're trying to match something else.
Whatever you use, you'll need at least 2-3 coats for a proper seal and finish of the wood.
hope that helps.
#
3
07-03-2011
, 12:28 AM
Lifetime Member
Join Date: Feb 2010
Location: Australia
Mate!!! that is bloody helpful! thank you so much...yeh I am making sure all the corners are bevelled for sure...I know how clumsy kids (and me) can be LOL. Wow I didnt know about the food safe oils man...thank you for that mate...I will look out for them at Bunnings and see if they have them...if not..to the hobby shop!
Thanks again for your help mate
cheers bullet
bullet1968
"A Darkness at Sethanon", a book I aspire to model some of the charcters and scenes
#
4
07-03-2011
, 01:42 AM
Lifetime Member
Join Date: May 2003
glad that helps a bit
here is some more info for you:
a site explaining the different oil finishes:
https://www.finewoodworking.com/Skill....aspx?id=26893
since you're in Australia, here is a site where you can preview the different items, and buy online if desired:
https://www.thewoodsmith.com.au/thewo...swoodsmith.htm
from personal experience I would use either the Rustin's Danish oil or Rustin's Worktop Oil
and FYI, teak oil, tung oil, and walnut oil will all darken the wood pieces a little so don't be surprised.
#
5
07-03-2011
, 11:49 PM
Lifetime Member
Join Date: Feb 2010
Location: Australia
Sweet mate!!! man you are a pearler of information...thank you again so much.
bullet1968
"A Darkness at Sethanon", a book I aspire to model some of the charcters and scenes
You may not post new threads |
You may not post replies |
You may not post attachments |
You may not edit your posts |
BB code is On |
Smilies are On |
[IMG] code is On |
HTML code is Off
|