Substance Painter
In this start to finish texturing project within Substance Painter we cover all the techniques you need to texture the robot character.
# 1 06-03-2004 , 01:19 PM
Renderizer's Avatar
Subscriber
Join Date: Jun 2002
Location: Germany
Posts: 276

Wacom tablets and lacking support for dual diaplay setups.

Hi all you Wacom users out there!



This post is especially for those of you who run a dual monitor setup in combination with a Wacom device.

If you do belong to this people, you have probably run into the fact that there is no fast and easy way to switch the tablet's mapping to another monitor.

Suggestions as to how to implement such a feature have been forwarded to Wacom for quite a long time now, but to no avail.

Wacom love to point out that the current driver structure (which dates back to '98) doesn't allow for such a feature.

Wacom stated that "It was definitely decided not to implement a button to toggle mapping, even so we basically find, that the idea is not bad."

There is a whole thread in the Wacom forum dedicated to this topic.

Go and have a looksee yourself at:https://www.wacom-europe.com/forum/to...=&TOPIC_ID=665

If you read the thread carefully and in it's entirety, you'll notice that it was started way back on 20/04/2002 - that's two years gone without any effect besides a lot of unnerved users.

Wacom says there are practically no users who run a dual display setup at all, which is definitely wrong these days, as I know from lots of specific threads on the CG boards.

All replys from Wacom do away with any suggestions in a pretty arrogant manner, and the tenor is: got two displays? buy another tablet!

The reason I'm posting all this is because I want you to go over to the Wacom site and post a request for some kind of 'toggle tablet mapping' feature.

Again, here's the link to the thread: https://www.wacom-europe.com/forum/to...=&TOPIC_ID=665

Please send your requests and/or suggestions also to support@wacom-europe.com to further broaden any possible impact.

After two years of 'we're not going to do that' some of us are pretty fed up...


Thank you for your support,


Renderizer (Mario)


Subdivide and conquer!

Free your mind, and your ass will follow!
# 2 06-03-2004 , 07:14 PM
Renderizer's Avatar
Subscriber
Join Date: Jun 2002
Location: Germany
Posts: 276
Just to make things clear: you CAN, and by default actually DO map the tablet to both displays, there is no problem in that.

But: mapping the whole tablet to both displays not only effectively reduces the per-screen horizontal resolution (and hence the precision) but also distorts the aspect ratio of the screen/tablet relationship (shapes appear squashed horizontally).

Especially when doing real paintwork, this is rather annoying.

It would be nice to have a means to switch the mapped area to different monitors: the whole tablet is mapped to one single display, and with the use of a button (for example, you could use the Intuos' tabletbuttons for this) you switch the mapping to the 2nd monitor.


Subdivide and conquer!

Free your mind, and your ass will follow!
Posting Rules Forum Rules
You may not post new threads | You may not post replies | You may not post attachments | You may not edit your posts | BB code is On | Smilies are On | [IMG] code is On | HTML code is Off