path Extude question
1 Attachment(s)
Hi,
I get a weird result with path extrusion. Can anyone tell me what I did wrong? I've attached the screenshot with red cirlcle indicating the problem area. Thanks guys~! as always. |
1 Attachment(s)
Here's the path and profile curve that I used.
|
hmm, try using a Profile Normal orientation
|
I get the same result.
Any Ideas? Thanks |
You probably don't have enough CVs on your profile curve, or if you do, they're not spaced evenly so the extrude gets all wonky. Go to "rebuild curves" and play with the span settings. Or, if you want start from scratch without having to rebuild, when using the CV tool, snap to grid while drawing the curve and place a CV at every "grid box" so the points are even. Also, use "profile normal" when extruding like Mike suggested.
|
1 Attachment(s)
Hi,
Looks like It has enough CVs amd they are evenly spaced out. I've attached the screenshot. Any other suggestion? Thanks. |
what sometimes happens with cv's especially when they are so close together, is that they get mixed up so that the cv that should be on the 3rd place in the order is now on the 4th or 5th place.
i also think you used to much cv's in the corners, i think you can get the same result with less cv's. good luck anyway |
I´m not at home and so I don´t have Maya on the desktop.
But the good thing in Maya is that you have very much ways to get what you want. Attach your circle to motion path(which is your curve) and set a time line value of 30 frames (start, end) (I think!) Duplicate the circle along the curve and loft them. When you get a wrong result check the normals that they are all in the same direction, or highlight the circles one by one from the first to the last and loft again. I think you will ask where the option is to duplicate along path. Its in the same tab where you did find the extrude along path option. I think it is called duplicate along path. I hope I said nothing wrong...:p |
1 Attachment(s)
Quote:
|
Thanks guys.
I took your advice and took a close look at the CVs. and you were right ..cv's in the corner were not properly placed. So I fixed it. NitroLiq. I never thought of creating curves..with using grid snap. It was very useful info. I think it could be really handy. Thanks for taking time and drawing it out for me~! Thanks guys~!! as always. |
All times are GMT. The time now is 03:44 AM. |
Powered by vBulletin® Copyright ©2000 - 2024, Jelsoft Enterprises Ltd.
Simply Maya 2018