Maya File error
I have a Maya File that keeps launching and crashing with a critical error. Anyone know a way to check the file for the damage? or a way to maybe open it just long enough to safe a new version of it?
It's an ASCII file |
Does it give an error message?
|
Just says: Fatal Error. Attempting to save in xxxxxx
Not sure if this will help, found the dump log //================================================== === Maya Crash Report //================================================== === Exception code: C0000005: ACCESS_VIOLATION - illegal read at address 0x346AB64C Fault address: 07D254F2 in C:\Program Files\Autodesk\Maya2011\bin\DeformSlice.dll 0001:001344F2 Logical offset (see .map file for location) Call stack: (0) section:offset Address Frame 0001:001344F2 0x07D254F2 0x0102D0F0 Module: C:\Program Files\Autodesk\Maya2011\bin\DeformSlice.dll (-exported-) Location: TgenericSurfaceAssociator::uvAssociation + 0x12 bytes Decl: public: enum TsurfaceAssociation::TsurfaceType TgenericSurfaceAssociator::uvAssociation(class T2Float const & ptr64,class TsurfaceAssociation & ptr64) (1) section:offset Address Frame 0001:00134DD5 0x07D25DD5 0x0102D190 Module: C:\Program Files\Autodesk\Maya2011\bin\DeformSlice.dll (-exported-) Location: TpolySurfaceAssociator::associateVtx + 0x115 bytes Decl: public: enum TsurfaceAssociation::TsurfaceType TpolySurfaceAssociator::associateVtx(unsigned int,class T4dFltVector const & ptr64,class TsurfaceAssociation & ptr64) (2) section:offset Address Frame 0001:0000CAAD 0x1540DAAD 0x0102D300 Module: C:\Program Files\Autodesk\Maya2011\bin\Modifiers.dll (-exported-) Location: TtransferAttributesCmd::deformerType + 0x5EAD bytes Decl: protected: virtual class Tmetaclass * ptr64 TtransferAttributesCmd::deformerType(void) (3) section:offset Address Frame 0001:000049BD 0x154059BD 0x0102D3A0 Module: C:\Program Files\Autodesk\Maya2011\bin\Modifiers.dll (-exported-) Location: TtransferAttributesFty::action + 0xCD bytes Decl: public: virtual int TtransferAttributesFty::action(void) (4) section:offset Address Frame 0001:00004537 0x15405537 0x0102DA00 Module: C:\Program Files\Autodesk\Maya2011\bin\Modifiers.dll (-exported-) Location: TdnTransferAttributes::deformData + 0x1B97 bytes Decl: protected: virtual void TdnTransferAttributes::deformData(class TdataBlock & ptr64,unsigned int,class T4dDblMatrix const & ptr64,class Tdata & ptr64,unsigned int) (5) section:offset Address Frame 0001:000BEA67 0x0254FA67 0x0102DB70 Module: C:\Program Files\Autodesk\Maya2011\bin\DataModel.dll (-exported-) Location: TdnGeometryFilter::computePlug + 0x367 bytes Decl: protected: virtual void TdnGeometryFilter::computePlug(class Tplug const & ptr64,class TdataBlock & ptr64) (6) section:offset Address Frame 0001:000024CB 0x154034CB 0x0102DBF0 Module: C:\Program Files\Autodesk\Maya2011\bin\Modifiers.dll (-exported-) Location: TdnTransferAttributes::computePlug + 0xAB bytes Decl: protected: virtual void TdnTransferAttributes::computePlug(class Tplug const & ptr64,class TdataBlock & ptr64) (7) section:offset Address Frame 0001:000B6824 0x01EE7824 0x0102DCF0 Module: C:\Program Files\Autodesk\Maya2011\bin\DependEngine.dll (-exported-) Location: TdependNode::dbEvaluate + 0x1E4 bytes Decl: protected: virtual bool TdependNode::dbEvaluate(class TmsgEval & ptr64) (8) section:offset Address Frame 0001:000B8C37 0x01EE9C37 0x0102DD50 Module: C:\Program Files\Autodesk\Maya2011\bin\DependEngine.dll (-exported-) Location: TdependNode::mpSafeDbEvaluate + 0x37 bytes Decl: protected: bool TdependNode::mpSafeDbEvaluate(class TmsgEval & ptr64) (9) section:offset Address Frame 0001:000B8E23 0x01EE9E23 0x0102DDF0 Module: C:\Program Files\Autodesk\Maya2011\bin\DependEngine.dll (-exported-) Location: TdependNode::processEval + 0x1B3 bytes Decl: protected: virtual bool TdependNode::processEval(class TmsgEval & ptr64) (10) section:offset Address Frame 0001:00057B2F 0x01E88B2F 0x0102DE20 Module: C:\Program Files\Autodesk\Maya2011\bin\DependEngine.dll (-exported-) Location: TfastTrack::debug + 0x86F bytes Decl: public: virtual void TfastTrack::debug(class TdebugOutput & ptr64,unsigned int) (11) section:offset Address Frame 0001:00016BB1 0x01E47BB1 0x0102DED0 Module: C:\Program Files\Autodesk\Maya2011\bin\DependEngine.dll (-exported-) Location: Tplug::evalConnectionValue + 0xF1 bytes Decl: public: bool Tplug::evalConnectionValue(bool,class TdgContext const & ptr64,class TdataHandle & ptr64) (12) section:offset Address Frame 0001:0001A266 0x01E4B266 0x0102DFB0 Module: C:\Program Files\Autodesk\Maya2011\bin\DependEngine.dll (-exported-) Location: Tplug::evaluateValue + 0xC6 bytes Decl: public: bool Tplug::evaluateValue(class TdataHandle & ptr64,class TdataBlock const & ptr64,bool) (13) section:offset Address Frame 0001:0004E8DB 0x01E7F8DB 0x0102E090 Module: C:\Program Files\Autodesk\Maya2011\bin\DependEngine.dll (-exported-) Location: TdataBlockDG::value + 0x10B bytes Decl: public: virtual class TdataHandle TdataBlockDG::value(class Tattribute const & ptr64) (14) section:offset Address Frame 0001:00070514 0x04221514 0x0102E320 Module: C:\Program Files\Autodesk\Maya2011\bin\Poly.dll (-exported-) Location: TmeshShape::computeObject + 0x224 bytes Decl: protected: void TmeshShape::computeObject(class Tplug const & ptr64,class TdataBlock & ptr64) (15) section:offset Address Frame 0001:000B6824 0x01EE7824 0x0102E420 Module: C:\Program Files\Autodesk\Maya2011\bin\DependEngine.dll (-exported-) Location: TdependNode::dbEvaluate + 0x1E4 bytes Decl: protected: virtual bool TdependNode::dbEvaluate(class TmsgEval & ptr64) (16) section:offset Address Frame 0001:0010CADB 0x0259DADB 0x0102E450 Module: C:\Program Files\Autodesk\Maya2011\bin\DataModel.dll (-exported-) Location: TdagObject::dbEvaluate + 0x1B bytes Decl: public: virtual bool TdagObject::dbEvaluate(class TmsgEval & ptr64) (17) section:offset Address Frame 0001:000B8BA2 0x01EE9BA2 0x0102E4B0 Module: C:\Program Files\Autodesk\Maya2011\bin\DependEngine.dll (-exported-) Location: TdependNode::mpSafeDbEvaluateWithSet + 0x52 bytes Decl: protected: bool TdependNode::mpSafeDbEvaluateWithSet(class TmsgEval & ptr64) (18) section:offset Address Frame 0001:00005A4D 0x01E36A4D 0x0102E540 Module: C:\Program Files\Autodesk\Maya2011\bin\DependEngine.dll (-exported-) Location: Tplug::processEval + 0x9D bytes Decl: private: bool Tplug::processEval(class TdgContext const & ptr64,class TdataHandle * ptr64) (19) section:offset Address Frame 0001:0001A536 0x01E4B536 0x0102E620 Module: C:\Program Files\Autodesk\Maya2011\bin\DependEngine.dll (-exported-) Location: Tplug::evaluateValue + 0x396 bytes Decl: public: bool Tplug::evaluateValue(class TdataHandle & ptr64,class TdataBlock const & ptr64,bool) (20) section:offset Address Frame 0001:0004E8DB 0x01E7F8DB 0x0102E700 Module: C:\Program Files\Autodesk\Maya2011\bin\DependEngine.dll (-exported-) Location: TdataBlockDG::value + 0x10B bytes Decl: public: virtual class TdataHandle TdataBlockDG::value(class Tattribute const & ptr64) (21) section:offset Address Frame 0001:00071FF0 0x04222FF0 0x0102E750 Module: C:\Program Files\Autodesk\Maya2011\bin\Poly.dll (-exported-) Location: TmeshShape::meshDataRef + 0x30 bytes Decl: public: class Tdata & ptr64 TmeshShape::meshDataRef(class TdgContext & ptr64) (22) section:offset Address Frame 0001:00075E45 0x04226E45 0x0102E780 Module: C:\Program Files\Autodesk\Maya2011\bin\Poly.dll (-exported-) Location: TmeshShape::midBody + 0x15 bytes Decl: public: class TmidBody * ptr64 TmeshShape::midBody(void) (23) section:offset Address Frame 0001:000217BE 0x041D27BE 0x0102E7C0 Module: C:\Program Files\Autodesk\Maya2011\bin\Poly.dll (-exported-) Location: TmeshShape::clearActiveComponents + 0xE bytes Decl: public: void TmeshShape::clearActiveComponents(void) (24) section:offset Address Frame 0001:000BC0E9 0x0598D0E9 0x0102E8A0 Module: C:\Program Files\Autodesk\Maya2011\bin\PolySlice.dll (-exported-) Location: TpolyHelixCmd::`default constructor closure' + 0xE29 bytes Decl: public: void TpolyHelixCmd::`default constructor closure'(void) (25) section:offset Address Frame 0001:002BBEA8 0x03C6CEA8 0x0102E970 Module: C:\Program Files\Autodesk\Maya2011\bin\Shared.dll (-exported-) Location: TglobalTranslator::callNodeCallbacks + 0x1C8 bytes Decl: public: static void TglobalTranslator::callNodeCallbacks(class TDNarray & ptr64,enum TglobalTranslator::TaddCallbackMode) (26) section:offset Address Frame 0001:002BC33A 0x03C6D33A 0x0102E9A0 Module: C:\Program Files\Autodesk\Maya2011\bin\Shared.dll (-exported-) Location: TglobalTranslator::callNodeCallbacks + 0x3A bytes Decl: public: static void TglobalTranslator::callNodeCallbacks(class TsceneFile & ptr64,enum TglobalTranslator::TaddCallbackMode) (27) section:offset Address Frame 0001:002BCA76 0x03C6DA76 0x0102E9D0 Module: C:\Program Files\Autodesk\Maya2011\bin\Shared.dll (-exported-) Location: TglobalTranslator::callNodeCallbacks + 0x56 bytes Decl: public: static void TglobalTranslator::callNodeCallbacks(enum TglobalTranslator::TaddCallbackMode) (28) section:offset Address Frame 0001:002BD498 0x03C6E498 0x0102ED00 Module: C:\Program Files\Autodesk\Maya2011\bin\Shared.dll (-exported-) Location: TglobalTranslator::doReadFile + 0x9E8 bytes Decl: private: static bool TglobalTranslator::doReadFile(class TsceneFile & ptr64,bool,bool) (29) section:offset Address Frame 0001:002A0FAE 0x03C51FAE 0x0102ED30 Module: C:\Program Files\Autodesk\Maya2011\bin\Shared.dll (-exported-) Location: TfileUtil::readFile + 0x5E bytes Decl: public: static bool TfileUtil::readFile(class TsceneFile * ptr64,bool,bool,bool) (30) section:offset Address Frame 0001:002913A5 0x03C423A5 0x0102EF60 Module: C:\Program Files\Autodesk\Maya2011\bin\Shared.dll (-exported-) Location: TsceneOperator::openFile + 0x385 bytes Decl: public: static bool TsceneOperator::openFile(class TsceneFile * ptr64,bool,bool) (31) section:offset Address Frame 0001:002890CC 0x03C3A0CC 0x0102EFF0 Module: C:\Program Files\Autodesk\Maya2011\bin\Shared.dll (-exported-) Location: TfileCmd::handleFileOpenFlag + 0x44C bytes Decl: private: bool TfileCmd::handleFileOpenFlag(class TargDatabase & ptr64,class TsceneFile * ptr64) (32) section:offset Address Frame 0001:0028EF9B 0x03C3FF9B 0x0102F430 Module: C:\Program Files\Autodesk\Maya2011\bin\Shared.dll (-exported-) Location: TfileCmd::handleFlags + 0x138B bytes Decl: protected: bool TfileCmd::handleFlags(class TargDatabase & ptr64,class Tstring const & ptr64) (33) section:offset Address Frame 0001:0028FE6E 0x03C40E6E 0x0102F590 Module: C:\Program Files\Autodesk\Maya2011\bin\Shared.dll (-exported-) Location: TfileCmd::doCommand + 0x35E bytes Decl: public: virtual bool TfileCmd::doCommand(class TargList & ptr64) (34) section:offset Address Frame 0001:0001354B 0x01D5454B 0x0102F660 Module: C:\Program Files\Autodesk\Maya2011\bin\CommandEngine.dll (-exported-) Location: TmetaCommand::newSyntax + 0x6BB bytes Decl: private: virtual class Tsyntax * ptr64 TmetaCommand::newSyntax(void) (35) section:offset Address Frame 0001:000296E0 0x01D6A6E0 0x0102F6B0 Module: C:\Program Files\Autodesk\Maya2011\bin\CommandEngine.dll (-exported-) Location: TmelVariableList::`default constructor closure' + 0xB0 bytes Decl: public: void TmelVariableList::`default constructor closure'(void) (36) section:offset Address Frame 0001:00035A84 0x01D76A84 0x0102F700 Module: C:\Program Files\Autodesk\Maya2011\bin\CommandEngine.dll (-exported-) Location: TmelVariableList::`default constructor closure' + 0xC454 bytes Decl: public: void TmelVariableList::`default constructor closure'(void) (37) section:offset Address Frame 0001:000520E0 0x01D930E0 0x0102F730 Module: C:\Program Files\Autodesk\Maya2011\bin\CommandEngine.dll (-exported-) Location: SophiaExecutable::evaluate + 0x60 bytes Decl: public: union Value * ptr64 SophiaExecutable::evaluate(void * ptr64) (38) section:offset Address Frame 0001:0001A8B3 0x01D5B8B3 0x0102F890 Module: C:\Program Files\Autodesk\Maya2011\bin\CommandEngine.dll (-exported-) Location: TcommandEngine::executeCommand + 0x393 bytes Decl: public: int TcommandEngine::executeCommand(class Tstring const & ptr64,bool,bool,class TmelCmdResult * ptr64,unsigned int) (39) section:offset Address Frame 0001:0000702B 0x4000802B 0x0102F980 Module: C:\Program Files\Autodesk\Maya2011\bin\maya.exe (-nosymbols-) (40) section:offset Address Frame 0001:00008931 0x40009931 0x0102FAF0 Module: C:\Program Files\Autodesk\Maya2011\bin\maya.exe (-nosymbols-) (41) section:offset Address Frame 0001:0000A6DE 0x0203B6DE 0x0102FBF0 Module: C:\Program Files\Autodesk\Maya2011\bin\ExtensionLayer.dll (-exported-) Location: Tapplication::start + 0x6E bytes Decl: public: void Tapplication::start(void) (42) section:offset Address Frame 0001:00003B9E 0x40004B9E 0x0102FE30 Module: C:\Program Files\Autodesk\Maya2011\bin\maya.exe (-nosymbols-) (43) section:offset Address Frame 0001:00012F37 0x40013F37 0x0102FEA0 Module: C:\Program Files\Autodesk\Maya2011\bin\maya.exe (-nosymbols-) (44) section:offset Address Frame 0001:00012463 0x40013463 0x0102FF50 Module: C:\Program Files\Autodesk\Maya2011\bin\maya.exe (-nosymbols-) (45) section:offset Address Frame 0001:0001552D 0x76BF652D 0x0102FF80 Module: C:\Windows\system32\kernel32.dll (-exported-) Location: BaseThreadInitThunk + 0xD bytes Decl: BaseThreadInitThunk (46) section:offset Address Frame 0001:0002B521 0x76E2C521 0x0102FFD0 Module: C:\Windows\SYSTEM32\ntdll.dll (-exported-) Location: RtlUserThreadStart + 0x21 bytes Decl: RtlUserThreadStart End of stack //crash file = C:\Users\Grant\AppData\Local\Temp\MayaCrashLog1304 10.1909.log //version = 2010.03.19.0311 //cut = Fri 03/19/2010, 201003190311 //last tool: renderWindowSelectContextItem //================================================== == //panel with focus: modelPanel4 //visible panels: // modelPanel4 outlinerPanel1 hyperShadePanel1 polyTexturePlacementPanel1 //================================================== == //Memory usage: // 2048.000 Mb Free Memory // 2048.000 Mb Free Swap // 422.602 Mb Current // 3.883 Mb POLY_DRAW_CACHE_DATA // 0.135 Mb arguments // 48.125 Mb MEL // 3.610 Mb Data Blocks // 0.125 Mb Keys // 1.697 Mb Arrays // 3.500 Mb Render Cache // 0.123 Mb Pixel Map // 0.373 Mb Transforms // 0.174 Mb Object Arrays //================================================== == |
Alright I am pretty much caught up with where this file was at anyway so dont worry to much about it. How ever if anyone comes up with a solution or knows a good place to learn this type of stuff to fix later problems please keep me informed.
|
It might be a corrupted DLL, DeformSlice.dll. You might want to try reinstalling, as this may happen again.
|
I recreated the problem, its using Transfer Attributes with UV selected instead of World, Local, or Component . Happens everytime I try and use that selection.
|
All times are GMT. The time now is 03:25 AM. |
Powered by vBulletin® Copyright ©2000 - 2024, Jelsoft Enterprises Ltd.
Simply Maya 2018