Introduction to Maya - Modeling Fundamentals Vol 2
This course will look in the fundamentals of modeling in Maya with an emphasis on creating good topology. It's aimed at people that have some modeling experience in Maya but are having trouble with complex objects.
# 1 20-07-2003 , 10:22 PM
danrocha's Avatar
Subscriber
Join Date: May 2003
Location: Campinas - SP - Brazil
Posts: 30

best hardware for Maya 5

Hello folks...

I am willing to get a new computer mainly to use Maya... which parts should a pay attention to? I know I need a good 3d video card, but what do you recomend? How much memory, and which processor....

I live in Brazil, so imported thing tend to be a very expensive here, so I would ask to keep your suggestion in a low-budget level! user added image

Thanx in advance...

Daniel


<font size="1"><strong>"The hardest thing to see is what is in front of your eyes"
<em>Goethe</em></strong></font>
# 2 20-07-2003 , 10:35 PM
BabyDuck's Avatar
Subscriber
Join Date: Nov 2002
Location: USA
Posts: 1,170
the best bet is to go to the website of a|w ( here ) and check under qualified hardware. and then you pick the best that meets the qualified you can and want to afford.

but who i am to suggest that - i still run maya on a gf2mx400 card, and i would be nuts to upgrade computer which i cannot take to the usa anyway when i immigrate on august 15th ...

# 3 20-07-2003 , 11:46 PM
Cyborg Corp's Avatar
Registered User
Join Date: May 2003
Location: Shanghai/Pittsburgh
Posts: 263
sigh, hate to embaress myself but i'll post my hardware...and i have very *few* problems with maya user added image
p7 12 gigz quad chips x2
25 gigs of DDR ram crystal transfer speed x10
Geforce ZX 1024 megs of video ram with 13 monitor display support (i know i know, i 'll upgrade it ASAP)
400 gig harddrive (almost out of space)
45 " LCD display (4 of them)


MSN: cyborg_corporation@hotmail.com
AIM: RavagingOrc
ICQ: 49041947
# 4 21-07-2003 , 04:06 AM
danrocha's Avatar
Subscriber
Join Date: May 2003
Location: Campinas - SP - Brazil
Posts: 30
Hmmmm I like that.... maybe I'll get one for me.... user added image


<font size="1"><strong>"The hardest thing to see is what is in front of your eyes"
<em>Goethe</em></strong></font>
# 5 31-07-2003 , 12:58 PM
Registered User
Join Date: Jul 2003
Location: londrina-pr-brazil
Posts: 34
ae cara seguinte compra um workstation que bom ve outro brazileiro
hi man buy one worksation is good see other brazillian see this people have a talent
[sorry about english i working in this]hehe

# 6 01-08-2003 , 06:04 PM
drknow's Avatar
Registered User
Join Date: Apr 2003
Posts: 1,033
Hal9000 - Will you buy me some points??? And a Hummer H1


It's Dr. Know, Not Darknow
# 7 06-08-2003 , 06:31 PM
carrot juice's Avatar
Registered User
Join Date: Mar 2003
Location: San Antonio, TX
Posts: 346
The one suggestion I would make would to get an nvidia quadro fx card or another maya- compatible programmable shader card, because otherwise you won't be able to take advantage of hardware rendering in maya 5.

# 8 07-08-2003 , 12:06 PM
gazzamataz's Avatar
Subscriber
Join Date: Apr 2002
Location: The Planet Apple MacTosh
Posts: 523

Graphics Cards

Anyone wanna recommend a graphics card for £200-250? Can you get a Quadro for that price?


Tickety boo and ta ta for a bit...
Gazzamataz
https://www.gazzamataz.com
# 9 07-08-2003 , 12:58 PM
NitroLiq's Avatar
Moderator
Join Date: Nov 2002
Location: New York
Posts: 2,133
MSI Ti 4200 soft-quadro'd up to Quadro 4 700 XGL. It's the cheaper route to go and works great.


"Terminat Bora Diem, Terminal Auctor opus."
# 10 07-08-2003 , 03:12 PM
gazzamataz's Avatar
Subscriber
Join Date: Apr 2002
Location: The Planet Apple MacTosh
Posts: 523
Just bought a Quadro 750XGL for a few quid - OUCH! - well see how that moves things along...

I did spot a new card which is slightly cheaper but not on Alias's Hardware Qualification Sheet. Its a Quadro FX 500, the 1000 and 200 are qualified so I guess this one will be too.

Basically I cannot wait to get it in my machine... and the card!user added image

NitroLiq, when you say the MSI Ti 4200 soft-quadro'd up to Quadro 4 700 XGL do you mean that the Ti200 was nearly as good as the 700XGL? Cos it don't support Hardware Layers from what I can see...

There are many cards based on GeForce256, GeForce2, GeForce3 and GeForce4 chipsets. nVidia and Alias|Wavefront do not recommend these cards for use with Maya as you may experience various refresh, display and stability problems and inadequate performance.



Tickety boo and ta ta for a bit...
Gazzamataz
https://www.gazzamataz.com

Last edited by gazzamataz; 07-08-2003 at 03:15 PM.
# 11 08-08-2003 , 12:59 AM
NitroLiq's Avatar
Moderator
Join Date: Nov 2002
Location: New York
Posts: 2,133
This can explain it better than I can, Gazz:

Soft Quadro

When I put my box together last fall, I bought the MSI ti4200 128MB card and softquadro'd it up to the 700XGL. It fixed a few issues I was having using the standard drivers like the infamous hypershade problems (no text on the shader nodes...no thumbnails in the shader nodes) and paintFX is a bit quicker. It's been very reliable.


"Terminat Bora Diem, Terminal Auctor opus."
# 12 08-08-2003 , 09:56 AM
gazzamataz's Avatar
Subscriber
Join Date: Apr 2002
Location: The Planet Apple MacTosh
Posts: 523
NitroLiq

You're a STAR! I have downloaded this and will be trying it out this weekend - YUMMY YUMMY YUMMY - BIG THANKS!!!


Tickety boo and ta ta for a bit...
Gazzamataz
https://www.gazzamataz.com
# 13 08-08-2003 , 05:38 PM
^^TwEeK^^'s Avatar
Registered User
Join Date: Apr 2003
Posts: 357
thats really cool....i will be buying an ABIT GF 4 TI 4200 128Mb...will it work with this card......and are there any risks?


- TwEeK
# 14 08-08-2003 , 10:37 PM
carrot juice's Avatar
Registered User
Join Date: Mar 2003
Location: San Antonio, TX
Posts: 346
Just don't slip with your soldering iron, or you may end up with an amazing Useles Transistor Clump Ti 4200.

# 15 09-08-2003 , 01:28 AM
NitroLiq's Avatar
Moderator
Join Date: Nov 2002
Location: New York
Posts: 2,133
You don't use a soldering iron, you patch nvidia's detonator drivers. If you screw up, you just have to go through the hassle of uninstalling/resinstalling drivers.


"Terminat Bora Diem, Terminal Auctor opus."
Posting Rules Forum Rules
You may not post new threads | You may not post replies | You may not post attachments | You may not edit your posts | BB code is On | Smilies are On | [IMG] code is On | HTML code is Off

Similar Threads