Lamborghini Project

# 1 31-10-2008 , 07:01 AM

Subscriber
Join Date: Sep 2005

Location: Palm Springs, Ca

Posts: 459

Good evening. I have started a project and wanted to post a WIP on it. I haven't done much in Maya for quite awhile and have found a tutorial that shows how to do the interior and the engine of a Lamborghini Murcielago. Always wanted to do a tutorial with an interior. Anyway it may be over my head, I think the body work I will be alright with. I have gotten started and here is where I am at:

I got the splines all laid out:
https://s157.photobucket.com/albums/t...ent=Spines.jpg

Here is a Lo-Res wire I have of the Bumper and Hood:
https://s157.photobucket.com/albums/t...LowResWire.jpg

A High Res wire Preview:
https://s157.photobucket.com/albums/t...othedWire1.jpg

And just a smoothed preview:
https://s157.photobucket.com/albums/t...hedPreview.jpg

The rest of the posts won't be so lengthy. But wanted to give an idea of where I am starting. This will take awhile I am sure. But I will do my Best!!

I hope that I can get guidence on what you may see in my work. Thanks!

Challenge me and I will try. Because If I should fail, failure also has a prize (Knowledge).

Quote

# 2 31-10-2008 , 02:14 PM

Super Moderator
Join Date: Dec 2006

Location: South FL

Posts: 3,522

Looks alrighty so far, good luck man.

P.S Why do I see the XP taskbar in every screen shot I've ever seen...ever lol? :p

- Genny
__________________
::|| My CG Blog ||::
::|| My Maya FAQ ||::

Quote

# 3 31-10-2008 , 04:04 PM

Subscriber
Join Date: Sep 2005

Location: Palm Springs, Ca

Posts: 459

Thank you GecT. I am sure I can use the luck!!

Challenge me and I will try. Because If I should fail, failure also has a prize (Knowledge).

Quote

# 4 01-11-2008 , 04:50 AM

Registered User
Join Date: Jun 2005

Location: t-dot

Posts: 646

wires looking good, this is going to be great and i can tell

wip
Kleemann cl65
my concept car

Quote

# 5 01-11-2008 , 05:30 AM

Subscriber
Join Date: Sep 2005

Location: Palm Springs, Ca

Posts: 459

Younglion from you I take as a very nice compliment. I have watched you work for so long and wished to do such stuff. Thank you!

I got the fender for the front done today and still needs some more refinement just behind the corner of the healight and runnint to the back. The instructor says that there is supposed to be a hint of a crease there and we will come back to it., Hope you all had a good day!!

Low Res Wire:
https://s157.photobucket.com/albums/t...owResWire2.jpg

High Res Wire:
https://s157.photobucket.com/albums/t...othedWire2.jpg

High Res Preview:
https://s157.photobucket.com/albums/t...edPreview2.jpg

Challenge me and I will try. Because If I should fail, failure also has a prize (Knowledge).

Quote

# 6 01-11-2008 , 11:24 AM

Acid44

Guest

Posts: n/a

lookin great so far man, where'd you find the tut? user added image

Quote

# 7 02-11-2008 , 01:01 AM

Subscriber
Join Date: Sep 2005

Location: Palm Springs, Ca

Posts: 459

Thank you Acid. I got it from 3D Buzz (Of course an Old Hippie would like that).

A couple of things about it though. He uses the Crease Tool alot and I don't use it at all. I do all of my own border edges. So I follow his lead, but use my own border edges.

Challenge me and I will try. Because If I should fail, failure also has a prize (Knowledge).

Quote

# 8 02-11-2008 , 01:43 AM

Acid44

Guest

Posts: n/a

cool thanks, i'm just wondering for the interior and engine :p i've never found a tut with both of those :S

EDIT: i cant seem to find the tut, what's it called?

Last edited by Acid44; 02-11-2008 at 02:05 AM.

Quote

# 9 02-11-2008 , 01:01 PM

Subscriber
Join Date: Sep 2005

Location: Palm Springs, Ca

Posts: 459

Acid as also have I bought it for the Interior and Engine modeling. I just went to the site and appears they have a problem this morning. I will check and give you a link alittle later, ok? The title of the tutorial is "Mastering Maya - Advanced Modeling Session II: Polygons Intensive". It is 2 DVD's and is 30 hours of training. I have watched some of the videos he does the interior and the engine. I think I can do it, and I sure want to try and learn.

I will get the URL to you Acid.

Challenge me and I will try. Because If I should fail, failure also has a prize (Knowledge).

Quote

# 10 02-11-2008 , 03:29 PM

Subscriber
Join Date: Sep 2005

Location: Palm Springs, Ca

Posts: 459

Acid, seems the link to it is still down. But if you go here:
https://www.3dbuzz.com/vbforum/sv_home.php

And scroll to the bottom of the page you will see two windows (3D Animation Products and Programming Products). If you scroll the window for 3D Animation to the right the next to the last product 'Maya Advanced Modeling' is the link you will want. I just checked and it is still down. Sorry!

Challenge me and I will try. Because If I should fail, failure also has a prize (Knowledge).

Quote

# 11 03-11-2008 , 11:36 PM

Subscriber
Join Date: Sep 2005

Location: Palm Springs, Ca

Posts: 459

Evening once again. Didn't feel too well for a couple of days, but got some stuff done on the car today. Got the door, windshield, and lower air intake below the door roughed in. I see from the videos we come back to through the car a couple more times to refine it.

Hope you all have a nice evening!!

Unsmoothed Wire View:
https://s157.photobucket.com/albums/t...othedWire3.jpg

Smoothed Preview:
https://s157.photobucket.com/albums/t...edPreview3.jpg

Challenge me and I will try. Because If I should fail, failure also has a prize (Knowledge).

Quote

# 12 06-11-2008 , 07:20 PM

Subscriber
Join Date: Sep 2005

Location: Palm Springs, Ca

Posts: 459

Evening again everyone. Got quite abit at least started and roughed in. Went back to the front door and did some work and the window just behind the driver. Got the Wing that pops up for air just behind that window. Also got the rear fender in back to the taillights. And started on the top of the car. I know things are a rough right now. Hope everyone is having a good weekend!!

Low Res Wire Preview:
https://s157.photobucket.com/albums/t...owResWire4.jpg

Smooth Preview:
https://s157.photobucket.com/albums/t...thPreview4.jpg

Challenge me and I will try. Because If I should fail, failure also has a prize (Knowledge).

Quote

# 13 06-11-2008 , 07:22 PM

Acid44

Guest

Posts: n/a

looking great man, the flow is beautiful user added image

Quote

# 14 07-11-2008 , 04:49 PM

Subscriber
Join Date: Sep 2005

Location: Palm Springs, Ca

Posts: 459

Thank you Acid!! I do appreciate it very much. I am having fun with it.

Challenge me and I will try. Because If I should fail, failure also has a prize (Knowledge).

Quote

# 15 08-11-2008 , 04:27 PM

Subscriber
Join Date: Sep 2005

Location: Palm Springs, Ca

Posts: 459

Just me popping in with an update to my WIP. I got the rear-end of the car all in place and the roof and some other things. We will start on detail and then hopefully soon to modeling the interior. That is what I am waiting for!! ;-)

Hope that all of your week has started well and it continues so.

Unsmoothed wire:
https://s157.photobucket.com/albums/t...othedWire5.jpg

Smoothed Preview:
https://s157.photobucket.com/albums/t...edPreview5.jpg

Challenge me and I will try. Because If I should fail, failure also has a prize (Knowledge).

Quote

Lamborghini Project

Posting Rules Forum Rules

Similar Threads

Topics

Free Courses

Full Courses

VFX News