Integrating 3D models with photography
Interested in integrating your 3D work with the real world? This might help
# 1 17-12-2010 , 09:20 PM
Sircharles's Avatar
Registered User
Join Date: Dec 2010
Location: Uk
Posts: 193

transfer maps - bump map

hi Im doing a tutorial which uses a bump map from a high polygon mesh (thread for a tyre)

he uses a program Xnormal which is pc only I believe to bake a bump map from the mesh.

Is there a way to do this in maya?


Thanks
Graham

# 2 17-12-2010 , 10:47 PM
ctbram's Avatar
Moderator
Join Date: Jan 2004
Location: Michigan, USA
Posts: 2,998


"If I have seen further it is by standing on the shoulders of giants." Sir Isaac Newton, 1675

Last edited by ctbram; 17-12-2010 at 11:48 PM.
# 3 18-12-2010 , 12:01 PM
Sircharles's Avatar
Registered User
Join Date: Dec 2010
Location: Uk
Posts: 193
but id like to make a bump map rather than a normal map, or is there a difference?

# 4 18-12-2010 , 12:24 PM
bullet1968's Avatar
Lifetime Member
Join Date: Feb 2010
Location: Australia
Posts: 4,255
Have a look in the maya help files mate...it explains it a little in there.

Cheers bullet


bullet1968

"A Darkness at Sethanon", a book I aspire to model some of the charcters and scenes
# 5 18-12-2010 , 12:29 PM
ctbram's Avatar
Moderator
Join Date: Jan 2004
Location: Michigan, USA
Posts: 2,998
Yes there is a difference. The bump map simply requires a greyscale image and a low poly mesh. The normal map generally starts with a high poly and low poly mesh and the high poly meshes detail is baked onto the low poly mesh. Both are just a lighting trick there is no actual geometry. From your description it sounded like you had a hi-poly mesh and wanted to create a normal map.

You should be aware that a bump map will only create the illusion of treads it will not actually displace the geometry so if you get to close or you view the treads edge on you will see that there is no actual tread geometry.


"If I have seen further it is by standing on the shoulders of giants." Sir Isaac Newton, 1675
# 6 18-12-2010 , 02:58 PM
ctbram's Avatar
Moderator
Join Date: Jan 2004
Location: Michigan, USA
Posts: 2,998
Here is an example for you...

1. make a simple tire and uv map it...This is just a simple cylindrical map with the seam at the bottom of the tire.
user added image

2. paint a bump texture in ps...50% grey == no offset, pushed in < 50% < push out.
user added image

3. here is a render without bump...
user added image

4. here is a render with bump applied...
user added image


"If I have seen further it is by standing on the shoulders of giants." Sir Isaac Newton, 1675

Last edited by ctbram; 18-12-2010 at 04:38 PM.
# 7 18-12-2010 , 04:30 PM
honestdom's Avatar
The Nurb Herd
Join Date: Oct 2007
Location: London
Posts: 2,381
not sure, but i think he was asking if you can bake normal maps in maya, not asking how to make a bump map.

you can bake a normal map in maya by going to the rendering menu set
lighting/shading > transfer maps...

# 8 18-12-2010 , 04:40 PM
ctbram's Avatar
Moderator
Join Date: Jan 2004
Location: Michigan, USA
Posts: 2,998

not sure, but i think he was asking if you can bake normal maps in maya, not asking how to make a bump map.

Not according to his last response. He wants to bump map.

but id like to make a bump map rather than a normal map, or is there a difference?



It's okay though I also thought he was interested in normal mapping at first. The problem is he used every word or phrase associated with every kind of "transfer map" in his original post because he does not know what any of them are so trying to figure out what he really wants is hard!

In any event I have already described both normal and bump maps and even linked to a free tutorial on normal mapping in this post so unless he changes his mind again and wants to do a displacement map (boj moi) he should be covered. user added image

I guess I should take a second and describe the three primary kinds of maps that are used to represent depth.

BUMP: Only requires a grey scale 2D image where 50% grey is no displacement and < 50% grey will appear to be displaced inward and > 50% grey will appear to be displaced outward. Bump does not actually displace the geometry it is only a trick of light and shadow. For this reason bump maps are given away if you get to close to the surface or you view a surface in silhouette.

NORMAL: Uses a RGB image that represents the surface normals of an object. For normal mapping one usually starts with a high-poly mesh and a low-poly mesh and then generates a normal map of the high-poly mesh and bakes the normal map of the high-poly mesh onto the low-poly mesh. Like bump mapping this does not actually displace the geometry it is only a trick of light and shadow. Like bump mapping getting to close or seeing the object in silhouette will give normal mapping away.

DISPLACEMENT: Uses a grey scale map like bump mapping but in this case the geometry is actually displaced. Therefore you can see the displacement in silhouette and if you get close. This can create a large amount of geometry (and dirty geometry at that) and will increase render times significantly but can reduce modeling time and complexity.

Cheers


"If I have seen further it is by standing on the shoulders of giants." Sir Isaac Newton, 1675

Last edited by ctbram; 18-12-2010 at 07:02 PM.
# 9 18-12-2010 , 06:04 PM
honestdom's Avatar
The Nurb Herd
Join Date: Oct 2007
Location: London
Posts: 2,381
my bad.... didn't see that post.


Last edited by honestdom; 18-12-2010 at 06:16 PM.
# 10 19-12-2010 , 12:19 PM
Sircharles's Avatar
Registered User
Join Date: Dec 2010
Location: Uk
Posts: 193
hi guys, thanks for all the replys. Prob frustrating not knowing what Im on about.

But CTBRAM showed an example of exactly what Im after.
However instead of drawing the bump in photoshop - this tutorial Im doing actually builds the threads first and then uses them for them to create a new bump map file - thus enabling him to delete the detailed polygon threads and just have a nice detailed bump.

He places a plane under the spread out threads and creates two obj files for each - like normal mapping I guess, but creates a nice bump map file in this other program.

Id like to be able to do that within Maya.
sorry for the long drawn out process.
Graham

# 11 29-12-2010 , 03:48 PM
ctbram's Avatar
Moderator
Join Date: Jan 2004
Location: Michigan, USA
Posts: 2,998
What you are describing sounds like normal mapping. Taking the detailed hires geometry (modeled tread) and creating a normal map. Then baking the normal map to the lowres geometry.

A normal map is a 256 (8-bit) color map that represent the (x,y,z) coordinates at each point on the surface. Like bump map it does not change the geometry and is simply a trick of light and shadow and is intended to allow you to take the details from a hipoly sculpt and transfer them to a lowpoly model for better animation performance.


"If I have seen further it is by standing on the shoulders of giants." Sir Isaac Newton, 1675
# 12 29-12-2010 , 10:44 PM
Nilla's Avatar
Administrator
Join Date: Jun 2009
Location: Prague
Posts: 827
A bit off the topic but to shed a bit more light on normal mapping in Maya you can also watch Mike's free tutorial, it might help a bit. I think he includes the bump map info in the normal map for this, not sure thoughuser added image

https://simplymaya.com/autodesk-maya-...=156&sub_cat=0

Posting Rules Forum Rules
You may not post new threads | You may not post replies | You may not post attachments | You may not edit your posts | BB code is On | Smilies are On | [IMG] code is On | HTML code is Off

Similar Threads