Substance Painter
In this start to finish texturing project within Substance Painter we cover all the techniques you need to texture the robot character.
# 1 01-12-2009 , 10:46 PM
Registered User
Join Date: Sep 2009
Location: new zealand
Posts: 10

mesh wont smooth

Hi i would like to know how to get the mesh of my character to smooth. i have already bound skin and done weight painting & am now ready to do a test render on a short piece of animating, but cant get the mesh to smooth. i went to: mesh / smooth. i am not sure if i need to change any of the settings on the option box, & did reset it before i pressed 'smooth'. i did try both 'exponentially' & 'linearly' but dont know what other settings to change accordingly. i read the Maya book section on smooth mesh, but it talks about 'preview smooth' all the time. i want the permanent smooth.

# 2 01-12-2009 , 10:57 PM
Registered User
Join Date: Oct 2009
Posts: 26
you need to change the division levels and continuity settings


Last edited by 3dNinja1; 01-12-2009 at 11:00 PM.
# 3 02-12-2009 , 03:18 AM
NextDesign's Avatar
Technical Director
Join Date: Feb 2004
Posts: 2,988
If you reset the smoothing settings, then it should have done it regardless.

You might have some history floating around, but if you don't know what you're doing, you could screw up all your work.

Quick way, but a bit slow, would be to convert the model to subd's. If it doesn't smooth out when you convert it that way, something is wrong with your model.

You can post it up, and I'll take a look at it.


Imagination is more important than knowledge.
# 4 02-12-2009 , 07:07 PM
Perfecto's Avatar
Registered User
Join Date: Mar 2007
Location: TN (USA)
Posts: 1,889
If you havn't already done so, make a copy of the file...and test on that. If you do happen to screw it up, you have a backup.


Don't be satisfied with what you can do but rather strive to do the things you can't do!
Exceed Expectations!
# 5 08-12-2009 , 08:40 AM
Registered User
Join Date: Sep 2009
Location: new zealand
Posts: 10

mesh doesnt smooth

HI, this is what the settings look like:

Attached Thumbnails
# 6 08-12-2009 , 01:46 PM
NextDesign's Avatar
Technical Director
Join Date: Feb 2004
Posts: 2,988
Strange.... post up the file and I'll take a look.


Imagination is more important than knowledge.
# 7 09-12-2009 , 02:20 AM
Registered User
Join Date: Sep 2009
Location: new zealand
Posts: 10

why wont mesh smooth

i have tried to send it, but it wont upload from here & your web takes me to another forum site where i still dont know how to upload - sorry, not very experience with this type of thing. could you let me know how i can upload the file?


Last edited by Leerling; 09-12-2009 at 02:36 AM.
# 8 20-12-2009 , 04:37 AM
NextDesign's Avatar
Technical Director
Join Date: Feb 2004
Posts: 2,988
Well, I figured it out. It was because the teeth were parented underneath the mesh, so it got confused on what to smooth. Unparenting the teeth, and instead using a parent constraint to the body worked.


Imagination is more important than knowledge.
# 9 06-01-2010 , 11:35 PM
Registered User
Join Date: Sep 2009
Location: new zealand
Posts: 10
just to say thanks again on the forum, i really appreciate the help.

Posting Rules Forum Rules
You may not post new threads | You may not post replies | You may not post attachments | You may not edit your posts | BB code is On | Smilies are On | [IMG] code is On | HTML code is Off

Similar Threads