Introduction to Maya - Modeling Fundamentals Vol 1
This course will look at the fundamentals of modeling in Maya with an emphasis on creating good topology. We'll look at what makes a good model in Maya and why objects are modeled in the way they are.
# 1 11-03-2011 , 01:18 PM
Registered User
Join Date: Mar 2011
Posts: 2

Lofting in Maya vs. 3DSMax

Hi

Coming from 3DSMax I'm having a hard time adapting some basic concepts to Maya. I'm especially stuck trying to translate Max's "Create -> Compound Object -> Loft" workflow to Maya where you could create a spline circle and a nurbs curve and loft the circle along the curve resulting in a solid object with no holes.

When I try to replicate that in Maya I always end up with holes on both sides of the resulting object. Is there really no way to fix this without using "Mesh -> Fill hole" which seems to (correct me if I'm wrong) add a new surface without reusing the the existing vertices of the border edges - resulting in visible seams.

Any help would be greatly appreciated user added image

# 2 11-03-2011 , 03:15 PM
LauriePriest's Avatar
Moderator
Join Date: May 2003
Location: London
Posts: 1,001
The tool your describing sounds like the extrude tool. which will extrude a profile along a path. Loft in maya will bridge 2+ profiles in order of selection.

I presume you are outputting polygons since you are using the fill hole command, this will just make a single polygon at each hole.

No new meshes are added to do this, it is not the same as using the planar opperation in NURBS (surfaces) which would create a new surface. All the planar tool does is create a polygon using existing verticies so no fusing is required.

You would only get 'visible seams' if your output was NURBS since commands that fill the hole such as planar do create new geometry (thats just how NURBS work) however as long as your tesselation settings are correct the seam will not be visible at render time.
The out put however will often be an n-gon so you will need to use split polygon to go in and make a tidy result.


FX supervisor - double negative
# 3 11-03-2011 , 05:12 PM
daverave's Avatar
The thin red line
Join Date: Aug 2009
Location: England
Posts: 4,472
Oliverw if you select edge then double click on the edge that goes around the top then extrude then merge to centre that will fix the hole.................dave




Avatar Challenge Winner 2010

Last edited by daverave; 11-03-2011 at 05:31 PM.
# 4 11-03-2011 , 07:33 PM
Registered User
Join Date: Mar 2011
Posts: 2

The tool your describing sounds like the extrude tool. which will extrude a profile along a path. Loft in maya will bridge 2+ profiles in order of selection.

Yes, you are right. Sorry user added image


No new meshes are added to do this, it is not the same as using the planar opperation in NURBS (surfaces) which would create a new surface. All the planar tool does is create a polygon using existing verticies so no fusing is required.

You would only get 'visible seams' if your output was NURBS since commands that fill the hole such as planar do create new geometry (thats just how NURBS work) however as long as your tesselation settings are correct the seam will not be visible at render time.

I had converted the NURBS surface resulting from the extrude operation to a Polygon Mesh and the seam I was seeing was simply the extruded source shape - which as NURBS curve had a slightly diifferent outline than its polygon replacement. So I made the mistake to misinterpret that.

Posting Rules Forum Rules
You may not post new threads | You may not post replies | You may not post attachments | You may not edit your posts | BB code is On | Smilies are On | [IMG] code is On | HTML code is Off

Similar Threads