Maya for 3D Printing - Rapid Prototyping
In this course we're going to look at something a little different, creating technically accurate 3D printed parts.
# 16 18-07-2008 , 05:15 AM
THX1138's Avatar
19 year Veteran
Join Date: Sep 2002
Location: U.S.A.
Posts: 2,140
DjBlazer's modeling threads are the best reference's for making holes IMO. Just do a search in the WIP modeling thread.

# 17 24-08-2008 , 05:22 PM
Subscriber
Join Date: Feb 2008
Location: Arizona
Posts: 30

But the hole collapses...

I'm making a hole in the wall using the Boolean function and my success is tenuous at best. It fails and looks crappy initially, but renders fine.

In the prep phase, I created a wall and an object to be used for the boolean operation.

user added image

I pushed the "green object" through the wall so that it intersects completely.

user added image

I selected the wall, THEN the green object and chose Mesh > Boolean > Difference and voila! ... a hole. But appearances can be deceiving as I have just created an n-gon that contains many edges and results in non-quads. There is a fix though...

user added image

I selected the faces around the inside of the hole and delete them.

user added image

I then selected an edge or two and then from the menu chose Select>Select Contiguous Edges but had to double-check to make sure the entire edge was selected.

user added image

Then I chose the Edit Mesh>Extrude command and pushing inward on the Green Arrow, I created a slight bevel.

user added image

I chose Extrude again and immediately switched to the Move tool and pushed the edge backwards until the edge was aligned with the back of the wall.

user added image

I created yet another bevel to close the gap...

user added image

I merged the paired-up vertices to complete the operation.

user added image

This is the result! I've performed this operation a half-dozen times, being careful to keep things clean, but the result is the same each time. The kicker is, it looks perfectly fine when it's rendered.

BUT, if I use the Mesh>Smooth command it ruins the hole and rendering no longer works. Is this everyone else's result? If not, what am I doing wrong?

user added image

# 18 25-08-2008 , 11:37 PM
ben hobden's Avatar
Subscriber
Join Date: Jul 2008
Location: Chelmsford, Essex, UK
Posts: 1,162
I think this is a great question as Im forever wanting to make extruded like indents in surfaces, but the split poly's tool can be quite a long process. That booleans post with the cylinder 'stamping' the cylindrical shape into the cube looks like it could be the answer, but I have tried this on one of my models, and when i did an error message came up saying:must have exactly 2 polygons selected. ???

The way I used it was, im modelling a keyboard, and the cylinder/booleans thing I was going to use for the headphones socket. So the keyboard body itself has already had quite a bit of work, so the only difference between the example in the post and mine was that two basic primitives were used rather than a more complex model, but the body of my keyboard was just a cube to start, ive beveled in some areas and extruded a bit, but at heart its just a cube. IT looks great in the example so why wont it work for me do you think?

# 19 26-08-2008 , 03:18 AM
pbman's Avatar
Subscriber
Join Date: Mar 2005
Location: London
Posts: 1,135
cut out by hand using the split poly tool its really not that hard
draw on the surface so you have enough vert for the shape.
line uup the other object on the surface of what u r wanting to extract. use snap to point(vert) option and move into plae.
delete inner face
extrude in
dup -1 to mirror and join the vert

this technique works even if u want to cut out circles doesnt matter what shape u want


Now at SMU doing BSc 3D Computer Animation so its hard to get on here
My wire render tut https://forum.simplymaya.com/showthre...threadid=20973
# 20 21-04-2011 , 11:23 AM
Registered User
Join Date: May 2008
Posts: 245
that is very easy, 2 step
1- smooth everyhting before booleans
2- select both object, apply boolean

# 21 21-04-2011 , 04:48 PM
daverave's Avatar
The thin red line
Join Date: Aug 2009
Location: England
Posts: 4,472

that is very easy, 2 step
1- smooth everyhting before booleans
2- select both object, apply boolean

Have you tried that? LOL dave




Avatar Challenge Winner 2010
# 22 22-04-2011 , 11:06 AM
bullet1968's Avatar
Lifetime Member
Join Date: Feb 2010
Location: Australia
Posts: 4,255
yes dubai3D that is the way to do it I have found, it is easier to smooth both geo's then do the boolean, you cant however smooth it again.

cheers bullet


bullet1968

"A Darkness at Sethanon", a book I aspire to model some of the charcters and scenes
# 23 22-04-2011 , 02:13 PM
Registered User
Join Date: Mar 2007
Posts: 1,055
You don't have to smooth first, you just have to clean up the geometry after the boolean command, which hasn't been done in this case. It's collapsing because the face around the archway has so many verts, it's never going to subdivide cleanly. Adding in some more edges and tidying it up would fix it and you could smooth it again if you needed to.

# 24 22-04-2011 , 02:46 PM
daverave's Avatar
The thin red line
Join Date: Aug 2009
Location: England
Posts: 4,472
Quite right gubar
Left side fixed right side not.............dave

Attached Thumbnails



Avatar Challenge Winner 2010
# 25 22-04-2011 , 11:41 PM
bullet1968's Avatar
Lifetime Member
Join Date: Feb 2010
Location: Australia
Posts: 4,255
no you dont have to do smooth first...its just easier....I use booleans all the time and yes your way dave is a neater geo but a lot of work. I have used both methods and it depends on the geo. If you look at the jetpack on my marine it would have been a lot of work with the split poly tool...so I smoothed first and did it the easy way. You also have to presplit the 2nd surface because you cant do it after the boolean...as I said it depends on how complex the geo is in which way I do it.


bullet1968

"A Darkness at Sethanon", a book I aspire to model some of the charcters and scenes
Posting Rules Forum Rules
You may not post new threads | You may not post replies | You may not post attachments | You may not edit your posts | BB code is On | Smilies are On | [IMG] code is On | HTML code is Off

Similar Threads