Integrating 3D models with photography
Interested in integrating your 3D work with the real world? This might help
# 1 07-03-2009 , 12:44 AM
Perfecto's Avatar
Registered User
Join Date: Mar 2007
Location: TN (USA)
Posts: 1,889

Computer/Vista Help Plz

A little while back, I came across a setting in Windows Vista that let me increase my computers performance (Control Panel\Hardware and Sound\Power Options). It was set on "Energy Star" so I changed it to "High Performance". Everything on my computer went from fancy looking to generic looking and dull.

But, it turns out that my computers performance is much much much worse on the High Performance setting. I couldn't hardly do anything with Maya, in fact 10,000 polygons would crash Maya. I have it back on Energy Star and I can now open up all my Maya projects again. So, I'm happy about that now, but...I now want to create some tutorials but I can't run Maya 2009 and Camtasia Studio 6.0 at the same time. Maya keeps freezing up. At first there were some hot key issues, but I set all the hot keys in Camtasia (both main screen and recorder) to Shift/Alt/Ctrl. But it still seems like my computer can't handle both at the same time.

Is there a way that I can boost the performance of my computer. I'm guessing there is since it's on Energy Star right now, but I don't know how. Apparently the High Performance Setting isn't doing what it's supposed to douser added image

EDIT: Ok, I played around with setting some more. The problem isn't the settings I mentioned above. It's the Visual Effects setting. If I set it to best appearance, then all is good, but if I set it to best performance, then I get the generic looking screens and performance is WAY BAD, hows that for irony. Anyway, I guess high performance means non graphical stuff maybe. Sounds like I need to invest in a better computer.


Don't be satisfied with what you can do but rather strive to do the things you can't do!
Exceed Expectations!

Last edited by Perfecto; 07-03-2009 at 01:05 AM.
# 2 07-03-2009 , 01:42 AM
Gen's Avatar
Super Moderator
Join Date: Dec 2006
Location: South FL
Posts: 3,522
That's Vista for ya. I had a similar issue when I disabled all the bells and whistles in the Vista GUI, performance went to crap in some programs, I just read this to my boyfriend and we both agree that it could be a lot of things (personally I think Maya is being underpowered hence the crashing). Don't know your configuration, is it off the shelf or built from scratch. Go in and instead of using those power and gui presets, manually change/disable them so you know EXACTLY whats being changed. Tweak your startup options, there's probably a lot of crap running that you don't need.


- Genny
__________________
::|| My CG Blog ||::
::|| My Maya FAQ ||::
# 3 07-03-2009 , 02:47 AM
Perfecto's Avatar
Registered User
Join Date: Mar 2007
Location: TN (USA)
Posts: 1,889
GREAT advice GecT, thanks a whole heap! I'll try that out now.


Don't be satisfied with what you can do but rather strive to do the things you can't do!
Exceed Expectations!
# 4 07-03-2009 , 03:10 AM
Perfecto's Avatar
Registered User
Join Date: Mar 2007
Location: TN (USA)
Posts: 1,889
YES, YES, YES! I'm not a computer technical person but I found the startup files, and I also found some other settings that I tweaked. My computers perfomance has jump up significantly just by changing a few things. I disabled some startup programs, went into the advance settings for my computers performance and set them manually like you said. I also found an NVidia control panel and maxed out the performance on it as well.

I did some tests and so far all is REALLY, REALLY GOOD! I pulled up some of my heavier maya scenes that give me alot of trouble just by rotating in shaded mode. Now they rotate really smooth and effortlessly. And Maya and Camtasia run smoothly together too.

THANK YOU!


Don't be satisfied with what you can do but rather strive to do the things you can't do!
Exceed Expectations!
# 5 07-03-2009 , 07:55 PM
Gen's Avatar
Super Moderator
Join Date: Dec 2006
Location: South FL
Posts: 3,522
No problemo, just gotta tweak some things, run disk defrag and cleanup periodically and all should be ok. Have fun and stuff :p


- Genny
__________________
::|| My CG Blog ||::
::|| My Maya FAQ ||::
# 6 07-03-2009 , 11:59 PM
Perfecto's Avatar
Registered User
Join Date: Mar 2007
Location: TN (USA)
Posts: 1,889
It worked really great, but I do need a better computer I think. When I get into the texture editor, my computer boggs down while camtasia is running. So, even though its much better than it originally was, it's still not powerful enough to perform the way I need it to. I'm going to spend a few days tweaking and such but if I can get it up to what I need, I'm going to start investing in a better computer.


Don't be satisfied with what you can do but rather strive to do the things you can't do!
Exceed Expectations!
# 7 08-03-2009 , 06:09 AM
Registered User
Join Date: Aug 2006
Location: /dev/null
Posts: 891
When you say that you disabled some startup programs, did you mean services?

Windows has a lot of services running or loaded into the memory that are not required by most people. Disabling them can free up a bit of memory.


C. P. U. Its not a big processor... Its a series of pipes!
# 8 08-03-2009 , 02:37 PM
Perfecto's Avatar
Registered User
Join Date: Mar 2007
Location: TN (USA)
Posts: 1,889
I looked into what you said Architect and I was startup programs that I disabled, not services. I found the services section but I don't know what most of those are. I'll try googling them later to see if I can figure out what each service is. At this point I'm a little hesitant to turn any of them off.


Don't be satisfied with what you can do but rather strive to do the things you can't do!
Exceed Expectations!
# 9 09-03-2009 , 09:10 PM
Gen's Avatar
Super Moderator
Join Date: Dec 2006
Location: South FL
Posts: 3,522
Perfecto, when you're recording the tuts is Maya maximized on high res? If that's so then the vid will be captured at a lame rate :/


- Genny
__________________
::|| My CG Blog ||::
::|| My Maya FAQ ||::
# 10 09-03-2009 , 10:18 PM
Perfecto's Avatar
Registered User
Join Date: Mar 2007
Location: TN (USA)
Posts: 1,889
What do you mean as in "full screen"? If so, yes, i have it maximized. I can't imagine doing it with a smaller screen, but the recordings are not effected as long as the ouput settings are set up correctly.

Edit: If there is a quality setting inside Maya, I'm not aware of it, where do I look?


Don't be satisfied with what you can do but rather strive to do the things you can't do!
Exceed Expectations!
# 11 09-03-2009 , 10:33 PM
Gen's Avatar
Super Moderator
Join Date: Dec 2006
Location: South FL
Posts: 3,522
Yeah that's what I meant. I'd tweak the recording settings but I still had some issues, they went away when I resized the Maya window :x


- Genny
__________________
::|| My CG Blog ||::
::|| My Maya FAQ ||::
# 12 11-03-2009 , 06:33 AM
Registered User
Join Date: Aug 2006
Location: /dev/null
Posts: 891

Originally posted by Perfecto
I looked into what you said Architect and I was startup programs that I disabled, not services. I found the services section but I don't know what most of those are. I'll try googling them later to see if I can figure out what each service is. At this point I'm a little hesitant to turn any of them off.

Yeah, one has to be careful when tweaking services - disabling the wrong ones can result in very bad things happening.

I did a very quick search on Google and found this site which looks like a good place to start (but it isn't official): https://www.speedyvista.com/services.php


C. P. U. Its not a big processor... Its a series of pipes!
Posting Rules Forum Rules
You may not post new threads | You may not post replies | You may not post attachments | You may not edit your posts | BB code is On | Smilies are On | [IMG] code is On | HTML code is Off

Similar Threads