Beer glass scene creation
This course contains a little bit of everything with modeling, UVing, texturing and dynamics in Maya, as well as compositing multilayered EXR's in Photoshop.
# 1 24-11-2014 , 09:36 PM
Registered User
Join Date: Nov 2007
Posts: 75

Warhammer 40k Rhino

Whenever I get bored of the Zoidzilla model I'm doing, I've been doing a bit of this model. I picked it because it's a nice blocky shape so it's easy. Next Imma do the APC from Aliens. After that, I'm going to do a brick.

The tracks don't actually work. They don't even go all the way around
[IMG]user added image[/IMG]

Side view. A nice big flat surface to facilitate easy penetration for enhanced blow-apart.
[IMG]user added image[/IMG]

Changing some details from the model to more realistic stuff. The original steps looked slippery and dangerous to climb in the wet. Even in war, people sometimes get hurt!
[IMG]user added image[/IMG]

Exhaust caps to keep the rain out. Missing from the model.
[IMG]user added image[/IMG]

This thing can lift up and turn little windows into slightly larger windows for enemies who have trouble shooting in through the little ones.
[IMG]user added image[/IMG]

The lights are fastened with allen bolts because enemies carrying allen keys are far more rare than those with screwdrivers.
[IMG]user added image[/IMG]

The whole top opens to facilitate easy occupant-slaughter.
[IMG]user added image[/IMG]

The back will also open in case the occupants start to feel too secure.
[IMG]user added image[/IMG]

Attached Thumbnails

Last edited by xgabrielx; 11-03-2015 at 10:35 PM.
# 2 24-11-2014 , 10:27 PM
daverave's Avatar
The thin red line
Join Date: Aug 2009
Location: England
Posts: 4,472
Looking good, I like the suspension on the rhino there is none........LOL..........dave




Avatar Challenge Winner 2010
# 3 24-11-2014 , 11:17 PM
Registered User
Join Date: Nov 2007
Posts: 75

Looking good, I like the suspension on the rhino there is none........LOL..........dave

It doesn't matter. As soon as you get off road, you are killed by all the bullets coming in through the open windows. I'm thinking of putting an extra door in the bottom just so every panel has a hole in it. Warhammer 40k stuff is like what a rampant rabbit would be like if it were designed by a gay bishop.

# 4 25-11-2014 , 10:01 PM
Registered User
Join Date: Nov 2007
Posts: 75
Just did a few detail bits and pieces today. I get bored easily.

It's supposed to be a military vehicle, so...this metal grill oughtta keep the bullets out.
[IMG]user added image[/IMG]

Yet another hatch.
[IMG]user added image[/IMG]

I seem to remember the old versions of this model gave you a choice between these antenna, or what looked like a few items from a picnic. I don't know why you'd put a picnic on the roof of something like this, so I went with the antennas.
[IMG]user added image[/IMG]

I don't know how the hatch on the model opens. Mine has hinges as I have limited access to magic.
[IMG]user added image[/IMG]

The door now opens. Gonna have to remember the health and safety stickers when I texture.
[IMG]user added image[/IMG]

Apparently, the designers thought it was normal for the wheels to be on the inside of the vehicle. Gonna have to fix that somehow.
[IMG]user added image[/IMG]

# 5 25-11-2014 , 11:21 PM
daverave's Avatar
The thin red line
Join Date: Aug 2009
Location: England
Posts: 4,472
Looking good xgabrielx , yes the warhammer guys never thought of the practicality of these thing like where is the engine or why the hell do I need to get out of this thing can't I shoot from inside................dave




Avatar Challenge Winner 2010
# 6 26-11-2014 , 01:39 AM
Registered User
Join Date: Nov 2007
Posts: 75
Yeah, and where do the tracks go. Cus there's no room above the door.Plus, the only seating arrangement that makes any sense is a double-sided bench going down the middle, leaving almost no room for equipment or to treat the wounded. You might fit 6 guys in there once the drivers seat is in. I guess the engine could be under the seat up the middle, and I can move some wheels around and lower the top of the door to make room for the tracks

# 7 27-11-2014 , 04:47 AM
Registered User
Join Date: Nov 2007
Posts: 75
Okay, so I shrunk the wheel that was protruding into the vehicle. I could have removed it, and still might.
[IMG]user added image[/IMG]

Made the big hatch at the back. As it there weren't enough ways in already.
[IMG]user added image[/IMG]

Guess I'll have to do the interior now.
[IMG]user added image[/IMG]

Made these exhaust covers. I don't remember them being on the model, but they are on all the pics I've found. I guess they were added later, or were an option. I think I prefer the look of the exhausts without them. But they keep bullets out of the exhaust I guess. The last thing you'd want is for the thing to sound noisy.
[IMG]user added image[/IMG]

# 8 30-12-2014 , 09:13 PM
Registered User
Join Date: Nov 2007
Posts: 75
Just downloaded 2 textures to throw on and get a better idea of how it's looking. I think it will be fine when I texture it properly. I want to add more detail like rivets, random eyelets and lifting eyes, and maybe a roll of camo netting strapped down on the roof. Maybe some shovels. The kind of junk you can store on the outside of the vehicle. Ain't nobody ever complained that their shovel got blown up!
[IMG]user added image[/IMG]

# 9 30-12-2014 , 10:37 PM
daverave's Avatar
The thin red line
Join Date: Aug 2009
Location: England
Posts: 4,472
Glad to see you are carrying on, will there be any space marines .................dave




Avatar Challenge Winner 2010
# 10 31-12-2014 , 02:44 PM
Registered User
Join Date: Nov 2007
Posts: 75
Nah. Too many curved bits! lol. I only have this model and the Zoidzilla model on the go right now. I stopped for a while to do a series of trippy animations to learn a bit about dynamics, but mostly, 'tis not the season for sitting at the computer.
Making the UV maps on this took longer than the model did. I have a feeling that if I'd uv mapped BEFORE I beveled, that the beveling probably wouldn't have messed up the map, and I'd have saved hours.

# 11 01-01-2015 , 12:57 PM
David's Avatar
SM Tea Boy
Join Date: Apr 2002
Location: Prague
Posts: 3,228
@xgabrielx check out headus uv, for stuff like this it's really quick.

dave user added image


From a readers' Q and A column in TV GUIDE: "If we get involved in a nuclear war, would the electromagnetic pulses from exploding bombs damage my videotapes?"
# 12 10-02-2015 , 08:21 PM
Registered User
Join Date: Nov 2007
Posts: 75

@xgabrielx check out headus uv, for stuff like this it's really quick.

dave user added image

I used it. I have the UV maps done. I just need the time and inclination to do the texturing. It's the zoidzilla model I've been working on that's going to be a real pain to texture. If I ever get it finished

# 13 11-03-2015 , 10:24 PM
Registered User
Join Date: Nov 2007
Posts: 75
[IMG]user added image[/IMG]

Added the lifting eyes and a few small details so I decided to do a quick render before I start on all the little details and maybe one day get around to texturing. For some reason I can't attach a new thumbnail to the thread. I tried editing the first post, and the manage attachment windows opened, but it closed itself at some point while I was in Photoshop, reducing the file size of this image, and it won't open again.


Last edited by xgabrielx; 11-03-2015 at 10:26 PM.
Posting Rules Forum Rules
You may not post new threads | You may not post replies | You may not post attachments | You may not edit your posts | BB code is On | Smilies are On | [IMG] code is On | HTML code is Off

Similar Threads