Introduction to Maya - Modeling Fundamentals Vol 2
This course will look in the fundamentals of modeling in Maya with an emphasis on creating good topology. It's aimed at people that have some modeling experience in Maya but are having trouble with complex objects.
# 1 03-10-2005 , 04:27 PM
Zelnaga's Avatar
Registered User
Join Date: Sep 2005
Posts: 14

Simple Human Model. Where to start?

Hey, ive recently started using Maya and followed the video tutorials about the cartoon dogs. I needed to use Maya because on one of my modules in Uni (Comp/Science Games Dev) requires me to make a simple model of a human in Maya.

I have 10 weeks to learn the package and have to submit the model before that. I was wondering what is the best way to start make the human on maya? Cause the best i have made is a cartoon dog. Im just need some advice and tips suck as

+ Where do i start
+ Any tips you guys can help me with in developing each of the parts? (arms, legs etc.)
+ Any guides/websites which can give detailed help, on making human models?

As i say, im completely new to his and have a limited knowledge on maya (only started last week) so any help would be appreciated. Thanks.

# 2 03-10-2005 , 04:59 PM
pbman's Avatar
Subscriber
Join Date: Mar 2005
Location: London
Posts: 1,135
im no expert so heres where i would start - but u can also wait for more seasoned users to reply for better help

reference pics
try that website for reference pics as these are the first thing u need as u have probably learned from the v.good dog tutorial.
u can eithe make it in a similar way to the dog nurbs -> convert to polys or u can start with polys from the start

hope that helps


Now at SMU doing BSc 3D Computer Animation so its hard to get on here
My wire render tut https://forum.simplymaya.com/showthre...threadid=20973
# 3 03-10-2005 , 05:13 PM
c3e's Avatar
Registered User
Join Date: Dec 2004
Location: Sweden
Posts: 48
dont know if theres (a best way) to make a head. im new into maya but i think i wold start with a box or a cylinder and start playing with the verts. simplymaya have a dvd (ninja modeling) it shows how to make a head. heres a site with online tuts https://www.learning-maya.com/index.p...art=0&search=*
gl

# 4 03-10-2005 , 05:28 PM
NitroLiq's Avatar
Moderator
Join Date: Nov 2002
Location: New York
Posts: 2,133
There are loads of character tutorials here if you want to go that route. Otherwise, look for box-modeling tutorials. You start with a cube and extrude, split and shape the body out. You can probably find some good-time lapses of this in the forums at spiraloid.com. If you have something where you can view each frame of the gif one at a time, it'll be helpful.

You can also google the infamous joan of arc tutorial...I believe 3dtotal hosts the english version.


"Terminat Bora Diem, Terminal Auctor opus."
# 5 03-10-2005 , 07:07 PM
Registered User
Join Date: Oct 2005
Location: Atl, Ga
Posts: 1
I agree, check out the tuts. I just got done scanning and there seems to be some really good ones here.


It doesn't matter what you believe in...as
long as you believe...
# 6 03-10-2005 , 07:22 PM
blomkaal's Avatar
Subscriber
Join Date: May 2004
Location: Denmark
Posts: 816

Originally posted by NitroLiq
You can also google the infamous joan of arc tutorial...I believe 3dtotal hosts the english version.

Yup, 3dtotal.com for the english version. You should definetly check it out, it's an amazing tutorial, and easily taken from Max into Maya.

Other than that, I'd suggest studying other peoples wires and figuring out how to make your edges flow, but that might take you a little more than 10 weeks, unless you work really, really hard of course user added image

Another really important step is getting good reference images. Other than that, just use the techniques you learned in the cartoon dog tutorial, and just should be well on your way.


Liter is French for 'Gimme some ****ing cola before I break vous ****ing lips!"
# 7 04-10-2005 , 12:03 AM
Registered User
Join Date: Aug 2004
Posts: 408
High poly or low poly?

# 8 04-10-2005 , 12:35 AM
Subscriber
Join Date: Feb 2005
Location: Winter Park, FL
Posts: 62
Here's a tip or two that may get you started in the right direction...

Go to your local library and find some anatomy books that shows muscle form and structure... and then study how the muscles flow and the direction....

Now, with that in mind, if you have done any traditional art ie drawing sculpting etc, you already have a good fundamentals on 3d modelling - the only difference is the modelling you want to do is on the computer.

There is no real area to start with, its mostly preference, but a good idea is to start with the body and extend to other parts of the body if you aren't using reference images on image planes...this way with the size of the body, you'll have a decent idea on how big to make the head.

The big picture (or many) in this case is reference material.. reference, reference, reference....its what that boils down to.

# 9 09-10-2005 , 02:29 PM
Zelnaga's Avatar
Registered User
Join Date: Sep 2005
Posts: 14
Question. Ive read the Joan of Arc tutorial and its very impressive. I was wondering wheter i should use the extrude function in Maya? Ive never done this before though, so it might take some time to figure out.

A problem ive been having in using NURBS is that, i dont know the best way to move the vertex? (the blue dots where you move the NURBS) so they dont bunch up together (picture below). Also whats the best way to add Isoparms? Like the above, i tend to add too much or too little, and end up having the vertex bunched up together : |

Still trying to get use to the program -_-

user added image

# 10 09-10-2005 , 02:52 PM
Registered User
Join Date: Aug 2005
Posts: 80
You should do the half side first then use an instance copy and locate it on the other side by changing the translate to "-1". Makes modeling easier.

# 11 09-10-2005 , 04:59 PM
Falott's Avatar
Registered User
Join Date: Jan 2005
Location: vienna
Posts: 1,095
for beginning I would not use nurbs. but that´s my opinion. I myself tried to start human modeling with nurbs but found polygonal modeling much more intuitive for beginners.

you might get yourself 2 tools which are mighty helpful for organic boxModeling and speed up your workflow tremendously.

- MJPolyTools
- SpinFaces



I know, the hardest part is where the heck to start off? here you can find my own attempts for answering this question in the past.


https://forum.simplymaya.com/showthre...threadid=17571


kind regards!


everything starts and ends in the right place at the right time.
# 12 09-10-2005 , 06:22 PM
Zelnaga's Avatar
Registered User
Join Date: Sep 2005
Posts: 14

Originally posted by Falott

you might get yourself 2 tools which are mighty helpful for organic boxModeling and speed up your workflow tremendously.

- MJPolyTools
- SpinFaces

Where can i get these tools from? Guess i should find them in google or something. Thanks for the thread. Ill have a look at it user added image

______________________________________________

I downloaded it and stuck both files on maya>Maya 7.0PLE>Scripts.

But when i type either on the MEL command, it says it can not find the procedure : |

Anyways i was looking at a technique used. https://www.suchyworks.com/textrusion.html Is this what the tools are for?



Last edited by Zelnaga; 09-10-2005 at 07:50 PM.
# 13 09-10-2005 , 11:18 PM
Registered User
Join Date: Aug 2004
Posts: 408

Originally posted by Falott
for beginning I would not use nurbs. but that´s my opinion. I myself tried to start human modeling with nurbs but found polygonal modeling much more intuitive for beginners.

you might get yourself 2 tools which are mighty helpful for organic boxModeling and speed up your workflow tremendously.

- MJPolyTools
- SpinFaces



I know, the hardest part is where the heck to start off? here you can find my own attempts for answering this question in the past.


https://forum.simplymaya.com/showthre...threadid=17571


kind regards!

I personally think that nurbs would be easier for some -- but then again I started modelling in Rhino 3d in my highschool 4-5 or so years back so I'm quite biased. Instead of people needing to visualize what a shape is from a planar-approximation they get the shape directly.

I never had a problem with that, but some did.

# 14 10-10-2005 , 09:40 AM
Falott's Avatar
Registered User
Join Date: Jan 2005
Location: vienna
Posts: 1,095


everything starts and ends in the right place at the right time.
# 15 10-10-2005 , 03:08 PM
sspikedudley's Avatar
Subscriber
Join Date: Jun 2004
Location: Nottingham
Posts: 344
If your using Maya seven then just use the split egde ring tool and the duplicate edge tool works the same as the MJPoly tools script

Personally I start off using primitives, cylinders and cubes and then use lattices and shift the vertices around by hand, personally I can can pull out more detail using this method rather than starting out with nurbs, but each to his own, if it works for you then no one else can tell you different

Posting Rules Forum Rules
You may not post new threads | You may not post replies | You may not post attachments | You may not edit your posts | BB code is On | Smilies are On | [IMG] code is On | HTML code is Off

Similar Threads