Maya 2020 fundamentals - modelling the real world
Get halfway through a model and find it's an unworkable mess? Can't add edge loops where you need them? Can't subdivide a mesh properly? If any of this sounds familiar check this course out.
# 1 07-04-2013 , 12:29 AM
Registered User
Join Date: Feb 2012
Posts: 53

Dynamics Error message

Hello
I have been having trouble in Maya 2011 with Dynamics.
So I ran a simple test to illustrate. Create CUBE, add Vortex and then PLAY but does not work as expected. And this error message shows up.
Warning Cycle on pCube1.worldMatrix[0] may not evaluate as expected.

I have no idea what that means.
Help please.
Dan
thanks

Attached Thumbnails
# 2 07-04-2013 , 02:59 AM
EduSciVis-er
Join Date: Dec 2005
Location: Toronto
Posts: 3,374
It's pretty harmless, it just means that the playback can't evaluate the dynamics correctly for example if you scrub backwards or skip frames. Check that your playback is set to play every frame.

# 3 07-04-2013 , 05:14 PM
Registered User
Join Date: Feb 2012
Posts: 53

I deleted my Prefs

stwert
thanks for the input.
I checked play everyframe - it was not set to that.
And I deleted my Prefs, do you know if you have to delete the whole pref files or just the mel files in prefs folder?
After I deleted the mel files in prefs, restarted my machine and I cannot get dynamics to work.
Again I am using 2011.
I have 2013 - and it works there?

All and any help would be awesome.
Dan

# 4 07-04-2013 , 10:02 PM
Gen's Avatar
Super Moderator
Join Date: Dec 2006
Location: South FL
Posts: 3,522
Looks like Maya is complaining that you haven't moved your cube from the origin so the simulation will be wonky.

Executing the code...

Code:
cycleCheck -e off;
...will stop the warning but won't change the simulation. Does the same scene simulated totally different between the two versions?

Also, you never really have to delete all your prefs, especially if you're unsure if it's even the source of your problem, all you have to do is close Maya, rename any given file or folder associated with Maya settings and launch Maya again, new defaults will be made.


- Genny
__________________
::|| My CG Blog ||::
::|| My Maya FAQ ||::
# 5 08-04-2013 , 12:12 AM
NextDesign's Avatar
Technical Director
Join Date: Feb 2004
Posts: 2,988

I checked play everyframe - it was not set to that.

I don't think you understand. When working with dynamics, play every frame MUST be on!

Also, in case anyone is interested, this is not a harmless warning! This will cause your scene to simulate extremely slowly in some cases, and as it says, may give incorrect results.

The backbone of Maya is the DAG, or Directed Acyclic Graph. This means that each node's output is directed into another node, and acyclic, meaning that you can't have cycles. Eg, you can't have cube1.translateX connected to cube1.translateX. What the warning you're getting is telling you, is that something you have done is creating a cycle. With dynamics, the previous frame affects the simulation for the next frame. If you scrub through the time line, it does not have the previous frame, and therefore the simulation is missing a key piece of information that it needs to simulate properly. Without this, you get unexpected results, as it says in the warning.


Imagination is more important than knowledge.
# 6 08-04-2013 , 01:22 AM
Gen's Avatar
Super Moderator
Join Date: Dec 2006
Location: South FL
Posts: 3,522

I don't think you understand. When working with dynamics, play every frame MUST be on!

Also, in case anyone is interested, this is not a harmless warning! This will cause your scene to simulate extremely slowly in some cases, and as it says, may give incorrect results.

The backbone of Maya is the DAG, or Directed Acyclic Graph. This means that each node's output is directed into another node, and acyclic, meaning that you can't have cycles. Eg, you can't have cube1.translateX connected to cube1.translateX. What the warning you're getting is telling you, is that something you have done is creating a cycle. With dynamics, the previous frame affects the simulation for the next frame. If you scrub through the time line, it does not have the previous frame, and therefore the simulation is missing a key piece of information that it needs to simulate properly. Without this, you get unexpected results, as it says in the warning.

It's weird, the problem occurred when I created a cube, then created a vortex field (with the cube still selected) and hit play.

Scratch what I said about moving the cube, the warning still pops up. Now I'm really curious, going to do some poking around later.


- Genny
__________________
::|| My CG Blog ||::
::|| My Maya FAQ ||::
# 7 08-04-2013 , 05:16 AM
NextDesign's Avatar
Technical Director
Join Date: Feb 2004
Posts: 2,988
It only happens to me when I jump to the start of the playback range. This is due to what I said above, with the solver not having enough data to simulate the new state.

The documentation for cycleCheck states the following:

Note that it is possible for evaluation cycles to occur even where no DG connections exist. Here are some examples: Nodes with evaluation-time dependent connections: An example is expression nodes, because we cannot tell what an expression node is actually referring to until it is evaluated, and such evaluation-time dependent nodes may behave differently based on the context (e.g. time) they are evaluated at. If you suspect a cycle due to such a connection, the best way to detect the cycle is through manual inspection.



Imagination is more important than knowledge.

Last edited by NextDesign; 08-04-2013 at 05:21 AM.
# 8 08-04-2013 , 01:35 PM
Registered User
Join Date: Feb 2012
Posts: 53

thanks NextDesign & others

thanks NextDesign
your explanation was interesting to say the least

I haven't had a problem with dynamics and I have been using Maya since it was Wavefront.

And the simulations work for me in 2013 as well as 2011 - that is until 5 days ago when I just wanted to do some fields simulations.

So simply put can't I start a new scene - create cube- apply gravity and then just hit play - with everyframe option turned on - and get a result?
dan

# 9 08-04-2013 , 02:34 PM
NextDesign's Avatar
Technical Director
Join Date: Feb 2004
Posts: 2,988

So simply put can't I start a new scene - create cube- apply gravity and then just hit play - with everyframe option turned on - and get a result?

You sure can.


Imagination is more important than knowledge.
# 10 08-04-2013 , 09:29 PM
Registered User
Join Date: Feb 2012
Posts: 53

no result

NextDesign
When I do steps above I get no result - obj does not move.
I am close to thinking I should do a clean install of Maya 2011.
It was working, I am just not sure when it stopped working - may be conflicting plug-in etc.
Dan

# 11 08-04-2013 , 10:44 PM
NextDesign's Avatar
Technical Director
Join Date: Feb 2004
Posts: 2,988
Try the following before you do that:

1) Make sure play every frame is on.
2) Create a cube, attach a rigid body, then apply gravity to it. See if that simulates when you click play.
3) Go to Modify>Evaluate Nodes, and click on Evaluate all. Check if it simulates now.


Imagination is more important than knowledge.
# 12 13-04-2013 , 10:32 AM
Registered User
Join Date: Feb 2012
Posts: 53

evaluate nodes

this did not work either?

I must have something turned off or disabled....

# 13 18-04-2013 , 05:40 PM
Registered User
Join Date: Feb 2012
Posts: 53

fixed problem

I have RealFlow and PDI installed and had both plugins enabled.

After I turned them off - Dynamics works again as normal.

Thanks for all advice.
dc

# 14 18-04-2013 , 08:01 PM
daverave's Avatar
The thin red line
Join Date: Aug 2009
Location: England
Posts: 4,472

I have RealFlow and PDI installed and had both plugins enabled.

After I turned them off - Dynamics works again as normal.

Thanks for all advice.
dc

Thanks for sharing that it might help out some one in the future.............dave




Avatar Challenge Winner 2010
Posting Rules Forum Rules
You may not post new threads | You may not post replies | You may not post attachments | You may not edit your posts | BB code is On | Smilies are On | [IMG] code is On | HTML code is Off

Similar Threads