Integrating 3D models with photography
Interested in integrating your 3D work with the real world? This might help
# 1 19-03-2003 , 02:19 PM
Registered User
Join Date: Dec 2002
Location: Netherlands
Posts: 1

Error: Cloth was recently disconnected. Playback, then retry making a button.

HELPEDIHELP.

When I try to make a button constraint Maya tells me: "Error: Cloth was recently disconnected. Playback, then retry making a button."

(ps. when I select the other way around (first cloth, then button) i get " Error: You must select 1 or more transforms and 1 cloth mesh." so that's not the problem)

Another problem I have creating cloth is that when I make a curve (closed by Edit Curves > Open/Close curve) and the select Panel it won't work. (" Error: Curves must form a closed loop. Check for unconnected or extra curves.")

I hope one of you can help me!

Remko

# 2 19-03-2003 , 05:01 PM
Kühl's Avatar
Subscriber
Join Date: Dec 2002
Location: Denmark
Posts: 329

Re: Error: Cloth was recently disconnected. Playback, then retry making a button.

Originally posted by re404
HELPEDIHELP.

Another problem I have creating cloth is that when I make a curve (closed by Edit Curves > Open/Close curve) and the select Panel it won't work. (" Error: Curves must form a closed loop. Check for unconnected or extra curves.")

I hope one of you can help me!

Remko

You cannot use the open/close curve because a panel must be made of two or more curves. If you for example use the CV Curve Tool, you should use "snap to curves" and drag the starting point of the new curved to the end of the "old" curve to form a loop. Remember that your last curve should end exactly on the starting point of the first curve to make it a closed loop.

Hope this make sense. I dont know anything about the botton-thing.


Kühl
Posting Rules Forum Rules
You may not post new threads | You may not post replies | You may not post attachments | You may not edit your posts | BB code is On | Smilies are On | [IMG] code is On | HTML code is Off

Similar Threads