Beer glass scene creation
This course contains a little bit of everything with modeling, UVing, texturing and dynamics in Maya, as well as compositing multilayered EXR's in Photoshop.
# 1 14-07-2004 , 07:02 PM
Subscriber
Join Date: May 2004
Location: Montreal, Qc
Posts: 19

Apache Helicopter Tutorial Finally Done!!! Well 3 parts left :S

Hi, First I'd like to thanks KBrown for this tutorial, it help me alot... I'm new in maya and this is my first thread in here and in a forum as well.. Well i'm using maya since a half year. Since i used maya for the very first time, i completly became crazy about CG.. The possibilities are Unlimited.. user added image Now that i've done this dvd i can't wait to try my own creations and see what i'm able to do with the techniques that KBrown learned me.. I don't really have drawing skills, but i'm not bad. This is why i'm gonna go in Art in Cegep. Hope it's gonna help. I finally done the highSchool this year. Anyway... Later i'd like to make movies FX.. Hehe i already have my blue screen and my miniDV video camera.. I made a cople of funny videos. One of them, its me in cookie plastic box, duplicated three times. user added image Anyway, all i wanted is your opinion on my helicopter.. It takes me less than a month to do. It was easy and it make me learned a lot.

Thank you for wasting your time by reading this and hope u like my (KBrown) Helicopter. user added image. U'll see that i didn't made inside but i'm gonna do it this week. cYa

Attached Thumbnails

Last edited by DigitalManiax; 14-07-2004 at 09:44 PM.
# 2 14-07-2004 , 08:01 PM
ereitz's Avatar
Subscriber
Join Date: Dec 2002
Location: Germany/Canada
Posts: 545
looks very clean user added image


Check out the subsurfacescattering on my tongue...

<a href="https://www.reitzmachine.com">www.reitzmachine.com</a>
# 3 14-07-2004 , 08:41 PM
CGPMaya84's Avatar
Registered User
Join Date: Oct 2003
Location: Maryland, USA
Posts: 172
Awesome looking model DigitalManiax! You really did an excellent job for this being your very first WIP on this thread! I really like all the detail you have in the apache helicopter. I hope you will continue to post more of your works on here! Also, I want to wish you luck in college! user added image I know that I have enjoyed it so far much more than high school. I too am an art major, and being at college has really improved my artistic skills. Hehe, just to think though...at one point all I could draw was stick figures...:bored: Anyway, keep up the great progress on that model! user added image


~CGPMaya84 (also DragonTU84 from SimplyPhotoshop and CPAnimate84 from SimplyMax)
# 4 14-07-2004 , 10:34 PM
ransick's Avatar
Subscriber
Join Date: Feb 2004
Location: Amsterdam
Posts: 731
hey DigitalManiax! nice work dude! It sure is really goooood job for first time! I didn't followed that tut but im sure I can make out of this that kbrown does a good job explaining everything! Great tut for newbie and novice you could say...
I allready can see you passion for cg! that's great...we got something in common....I think we all have user added image


...
# 5 14-07-2004 , 10:34 PM
NextDesign's Avatar
Technical Director
Join Date: Feb 2004
Posts: 2,988
Looks great mate!


Imagination is more important than knowledge.
# 6 15-07-2004 , 09:10 PM
Kevin
Guest
Posts: n/a
great job dude, looks spot on to me!!

well done

# 7 15-07-2004 , 09:38 PM
kbrown's Avatar
Moderator
Join Date: Sep 2002
Location: London, UK
Posts: 3,198
Looking good. Glad you liked the tute. The rotor blades seems missing the smoothing though user added image


Kari
- My Website
- My IMDB

Do a lot, Fail a lot and Learn a lot!
# 8 19-07-2004 , 08:23 AM
Subscriber
Join Date: Jul 2004
Posts: 49
Nice finished work.. the PNVS Turret needs to be bigger.. also, in stowed position, it (the top bump - elevation mirror cover) never stows straight back, it should always be about 2 o'clock looking from the front to the back.

Nice A-model overall though..

Also if you want to add a touch more detail, there should be two eyebrow panels just back of the nose behind the TADS/PNVS TTI mount. Inside those is where the two EGI units are located along with the ORT Column.

One more minor thing, the Airspeed indication tube on top is wayyy too long, needs to be about 1/2 the length.

Love it..
Ron Stepp
Apache Longbow AAE&I Technician, Fort Rucker


Last edited by MorituriMax; 19-07-2004 at 08:26 AM.
# 9 19-07-2004 , 11:36 AM
mumbojumbo_13's Avatar
Subscriber
Join Date: Oct 2002
Location: The Land Down Under
Posts: 1,047
woo user added image a real apache guy
kbrown shoudl get in contact with you man user added image
i dunno if its just me but could you circle the wrong areas and explain for people who dont know what your talking about user added image
--
cool anyway digi user added image


Thanks for wasting your time reading this line.
# 10 19-07-2004 , 03:13 PM
Subscriber
Join Date: Jul 2004
Posts: 49
Well thanks.. here is a shot that I think will help illiustrate the forward nose booboo..

As you can see the PNVS Turret is quite a bit larger than what I saw here.. no biggie.. I wish it were that small each time I change one out when it goes bad.. The new M-PNVS will be more plug and play, instead of the wiring harness being exclusively part of the turret, it will be wired so the harness mates with a plug on the future lot aircraft.

The left FAB (Forward Avionics Bay) is shown with a warning detector mounted (little circular unit) and has a lot of the TADS/PNVS electronics inside it, including the TEU (TADS Electronic Unit), and TPS (TADS Power Supply). It reaches forward more than is shown in your neat model.

Oops, on second thought disregard the FAB length in this photo, it's a D-Model and they extended it somewhat from the A-Model, the TADS/PNVS proportions are correct though, it didn't change enough to notice.. sorry.. grin.. why can't you all be doing Longbows instead?! 8)

Attached Thumbnails

Last edited by MorituriMax; 19-07-2004 at 03:19 PM.
# 11 19-07-2004 , 03:39 PM
kbrown's Avatar
Moderator
Join Date: Sep 2002
Location: London, UK
Posts: 3,198
Nice to hear some details on this monster as I had no idea what the parts were when I was modeling my apache. As you propably know I am the guy behind the apache modeling tute so you can mostly blame me about the wrong proportions etc user added image I used an el'cheapo not-so-accurate plastic model kit as my main reference... Anyway... welcome to the site user added image


Kari
- My Website
- My IMDB

Do a lot, Fail a lot and Learn a lot!
# 12 20-07-2004 , 05:11 AM
Subscriber
Join Date: Jul 2004
Posts: 49
Roge that.. shoot no biggie.. I haven't downloaded the tutorial yet, but am going to check it out.. for not having a whole lot of detailed knowledge you got it darn near close..

Anything I offer will be mainly tweaking.. not sure what level of detail or accuracy you intended. There are some details that changed quite a bit.. for example, the little barrel up top over the rotors is actually where the fire control radar is mounted when they do so.. they actually increase the engine power going from A to D models for the additional weight of the MMA (mast mounted assembly) dome.

I'll try and download the tutorial and once I scrape the money together I am going to go for maya, right now I have LW8 and Rhino3D.. I really like what I have seen of maya..

Seeya
Ron Stepp
Apache Longbow AAE&I Technician, Fort Rucker

# 13 22-07-2004 , 09:37 AM
Subscriber
Join Date: May 2004
Location: Montreal, Qc
Posts: 19
Thank you all guys for u comments. I'm gonna try what u told me about the proportion, but for now i got holydays to relax. But hey KBrown, i just have a question. You know when you use the Cut faces tool, you select the faces that u wanna cut and cut them. But after your selection still there. In my Maya the selection left and I need to select them again. It's really annoying and I tried to discover why and i didn't found anything. Thanks you again. cYa. i'll be back in 1 week.

# 14 22-07-2004 , 11:12 AM
kbrown's Avatar
Moderator
Join Date: Sep 2002
Location: London, UK
Posts: 3,198
DigitalManiax: Someone else has asked this same before too. I truly have no idea why this happens :/


Kari
- My Website
- My IMDB

Do a lot, Fail a lot and Learn a lot!
# 15 22-07-2004 , 03:35 PM
Subscriber
Join Date: May 2004
Location: Montreal, Qc
Posts: 19
Ok i'll try to find it myself and if I find it i'll give u news..

Posting Rules Forum Rules
You may not post new threads | You may not post replies | You may not post attachments | You may not edit your posts | BB code is On | Smilies are On | [IMG] code is On | HTML code is Off

Similar Threads