Maya for 3D Printing - Rapid Prototyping
In this course we're going to look at something a little different, creating technically accurate 3D printed parts.
# 1 11-04-2007 , 04:46 AM
Rhetoric Camel's Avatar
Subscriber
Join Date: Dec 2006
Location: Plattsburgh New York
Posts: 1,222

First car - Dodge Viper WIP

This is my first attempt at modeling a car I've wanted to do one for a while but couldn't think of a car I'd like to do. I found a bluprint of a Viper RT-10 on the-blueprints.com and decided this would be a fun car. I couldn't figure out how to model it or how to get it started so I jumped on the trusty internet and downloaded the car tutorial from simplymaya and have been using that as a guide. This is, I hate say, my progress today, about 3-4 good hours of going back and forth between the tutorial and the modeling.

any comments or advice would be great.

user added image
user added image
user added image

# 2 11-04-2007 , 08:35 AM
Rhetoric Camel's Avatar
Subscriber
Join Date: Dec 2006
Location: Plattsburgh New York
Posts: 1,222
after doing a little picture hunting on the car, i think I might change up my hood and body style a little bit, I don't like the backwards opening hood. The only problem I have with the blueprints I just got is that there is just side, front, and back, no top view.

# 3 11-04-2007 , 10:54 AM
Sicky's Avatar
Subscriber
Join Date: Oct 2004
Location: Nottingham , UK
Posts: 168
its looking good , are you working on both sides of the car ? or did u mirror it b4 u took a picture?. im not sure what model of the viper your modeling so i cant realy comment on its curves, the gaps between bodyparts look alittle big to me,
then again i think mine are the same lol, keep it up tho man its looking good

*edit
ok you did say the model of the car my bad lol

the arches at the front look as they go outa little then curve right in , the hood looks like its the front fender aswell but you said you changed it so it was like a normal hood so i cant comment on that lol.

anychance of a smoothed shot without wireframe on ?


Last edited by Sicky; 11-04-2007 at 11:01 AM.
# 4 11-04-2007 , 06:20 PM
Gamester's Avatar
Registered User
Join Date: Oct 2004
Location: Portugal
Posts: 214
Hi

Nice start....you're going great....keep it going....and continue posting updates

No critics to add so far user added image


"One day someone tells me that I was no one, no one is perfect, if God is perfect so I'm God" - No One
# 5 11-04-2007 , 11:55 PM
Rhetoric Camel's Avatar
Subscriber
Join Date: Dec 2006
Location: Plattsburgh New York
Posts: 1,222
thanks to those of you who have left comments so far

and to answer the question about the hood on the previous model, the fender and hood were all one piece because it was one of the hoods that lifted from the windshield not the front bumper. I started looking at it and decided not to try with that.

here is the new model, unfortunately the image sizes in the planes were the wrong size so a lot of it is more just looking at pictures and guessing. I'm going to stick with this one though as the hood is not as big and complicated on this model as the previous one.

user added image

user added image

user added image

user added image

I'm trying to make it look like this car:
user added image

Any ideas of what I should do before getting too much further or any comments please post them. Appreciate it

# 6 12-04-2007 , 07:47 AM
Sicky's Avatar
Subscriber
Join Date: Oct 2004
Location: Nottingham , UK
Posts: 168
its coming on , but to me it looks like u have 2 diffrent faces at the front where the grill is , looks as if theres one behind it thats curved more than the front one , i still think theres way to many edges its gonna be realy hard for you to follow the curves with all them, lots have people have told me never to add edges i dont need check this tutorial out it will realy help you out i promise , its a diffrent car but it will give u a idea on how to many things a bit more simple for ya to get the curves that you need

# 7 12-04-2007 , 12:58 PM
Rhetoric Camel's Avatar
Subscriber
Join Date: Dec 2006
Location: Plattsburgh New York
Posts: 1,222
yeah that extra piece was supposed to be the bumper but I don't really need that piece there anymore, I did delete that out of there after I posted these pictures.

The geometry I have in I'm still tweeking quite a bit to get everything in place on the hood, and to get the curves on the hood and the headlight area just right (which I'm still having trouble with). I will give a look at the link you gave me. Thank you for your comments

# 8 12-04-2007 , 01:02 PM
Sicky's Avatar
Subscriber
Join Date: Oct 2004
Location: Nottingham , UK
Posts: 168
not a problem just trying to help out by givin you things people have been kind enough to give me and teach me about i wish you all the best with this m8y GL

# 9 12-04-2007 , 01:05 PM
Rhetoric Camel's Avatar
Subscriber
Join Date: Dec 2006
Location: Plattsburgh New York
Posts: 1,222
thanks again. And one more thing about my mesh, this is still pretty low polly in my mind and I want to get this as high poly as I want. Everything I've done has been a jagged low poly model, this, if it doesn't kill me, will be my first high poly count model.

# 10 12-04-2007 , 07:39 PM
petrol's Avatar
Subscriber
Join Date: Mar 2005
Location: London UK
Posts: 351
Making something high poly is simple really but theres no way you'll get anywhere with the polycount you're working with. If you have a really decent meshflow on a low poly object, smooth proxy can increase the mesh density in seconds and it should look really curvy. Listen to the advice here, hes just been-here-done-that... you need to scrap this for the moment (you'll thank me later), check the tuts and start over later once you understand the principles of doing such a task.

Good luck though man, you'll feel great once you've done it.

# 11 12-04-2007 , 07:41 PM
Rhetoric Camel's Avatar
Subscriber
Join Date: Dec 2006
Location: Plattsburgh New York
Posts: 1,222
Today I spent a lot of time tweeking the mesh around making it flow better than it was. Cut the holes out for the lights, bumber, and part of the hood. Fixed the fender bumps around the tire a little bit better (still can't get the right look). I also figured out how to do an occlusion render the right way.

Heres the occlusion render (I think thats what it's called)

user added image

Starting to take shape a little bit better after hours and hours of messing with the mesh and adjusting vertices one at a time

# 12 15-04-2007 , 02:06 PM
Rhetoric Camel's Avatar
Subscriber
Join Date: Dec 2006
Location: Plattsburgh New York
Posts: 1,222
I haven't had time to work on it monday because I had to work, yesterday I had off but couldn't get myself to sit at the computer to work on maya all day. And today I got to it around 5 and worked until 8 to get the back and trunk done.
Worked on the back and a lot of other random mesh tweeking to make it look as clean as I could (which isn't too clean looking but as good as I can get it right now)
The back looks kind of messy but it's the only way I could get everything placed where I needed them without adding more unnecessary lines

Please leave feedback, opinions, ideas, thoughts... I think i've got 'em all covered

heres front and back wireframe

user added image
user added image

Front and back poly smooth. I know a few edges on the back are still kinda bumpy, I'll work more on that either later tonight or tomorrow after work.

user added image
user added image

# 13 15-04-2007 , 07:22 PM
Sicky's Avatar
Subscriber
Join Date: Oct 2004
Location: Nottingham , UK
Posts: 168
looks good man , its come on along way , 1 think tho it looks like theres a hole in your mesh on the rear fender where it meets the door u might wanna allign that up ,

i still havent found out how to do occlusions yet 0-o lol


Last edited by Sicky; 15-04-2007 at 07:24 PM.
# 14 28-04-2007 , 05:58 PM
Rhetoric Camel's Avatar
Subscriber
Join Date: Dec 2006
Location: Plattsburgh New York
Posts: 1,222
added the headlights and tail lights and tires, little more body work then its on to the interior.

user added image
user added image
user added image

# 15 28-04-2007 , 10:40 PM
Sicky's Avatar
Subscriber
Join Date: Oct 2004
Location: Nottingham , UK
Posts: 168
u made some nice progress man good job , it looks wobbly tho :/ u need to sort some of the vetices out or remove them which ever ya prefer to smoothen it up a little bit

Posting Rules Forum Rules
You may not post new threads | You may not post replies | You may not post attachments | You may not edit your posts | BB code is On | Smilies are On | [IMG] code is On | HTML code is Off

Similar Threads