Maya for 3D Printing - Rapid Prototyping
In this course we're going to look at something a little different, creating technically accurate 3D printed parts.
# 1 09-08-2005 , 10:58 PM
Registered User
Join Date: Aug 2005
Posts: 3

How do you do this in Maya?

Dear experienced Maya users!

After years of work with mostly technical 3D-software I've finally switched to Maya and am now learning Maya modeling techniques.
As one of my first exercises I am trying to create what basically is a cylinder with a radial groove crossed by a cylindrical "ripple" with its edges rounded against the groove. (Please look at the attached picture).

I found this easy enough to model in Rhino or in one of the technical programs (SolidWorks, Catia etc.). But how is it done in Maya? The limitations of the NURBS trimmed surfaces obviously don't allow me to get the fillet right and I'm just not happy with creating that ripple by only moving control vertices, as that doesn't give me the geometrical exactness I would like to have. I really want that ripple to look like a cylinder.

Is there a better way to do this? Is NURBS the right way to start in the first place?

I would be very grateful if you could help!!

Greetings,
Nebogipfel

# 2 09-08-2005 , 11:01 PM
Registered User
Join Date: Aug 2005
Posts: 3
Here's the picture. I forgot ...

Attached Images
# 3 11-08-2005 , 10:12 PM
Registered User
Join Date: Apr 2003
Posts: 19
First off, I'm not particularly good at modelling, but this is what I would do. Start by creating the main piece using a profile curve and then going to Surfaces>Revolve (make sure your axis of revolution is set to the y-axis). To create the cylindrical ridge, create a nurbs cylinder and position it where you want the ridge.

The idea here is to create two objects that fit together. You'll need to use Edit NURBS>Intersect Surfaces in order to get surface curves at the exact places of intersection. You'll also need to duplicate the objects (the main piece and the cylinder) because the next step is trimming.

Trim away the parts of the main piece and the cylinder that you don't need using the surface curves from before. Now set the view to show the Trim Edges on the cylinder and the main piece and go to Edit NURBS>Round Tool. Select the trim edges on the cylinder and the main piece and hit enter. This will create a nice tranisitional section between the two surfaces. There you have it.

To render (depending on the size of this object in your scene), you may want to increase the NURBS tessellation at render time. To do this, select the surfaces you have created and, in the Render menu set, go to Render>Set NURBS Tessellation[]. Under Curvature Tolerance select Highest Quality, and make sure at the top that Apply Tessellation is set to Selected Surfaces. Hit Set and Close and you're good to go.

user added image


user added image


user added image


Last edited by TheElement; 11-08-2005 at 10:29 PM.
Posting Rules Forum Rules
You may not post new threads | You may not post replies | You may not post attachments | You may not edit your posts | BB code is On | Smilies are On | [IMG] code is On | HTML code is Off

Similar Threads