Introduction to Maya - Modeling Fundamentals Vol 1
This course will look at the fundamentals of modeling in Maya with an emphasis on creating good topology. We'll look at what makes a good model in Maya and why objects are modeled in the way they are.
# 1 29-01-2014 , 04:33 PM
Sircharles's Avatar
Registered User
Join Date: Dec 2010
Location: Uk
Posts: 193

Tv

Hi Im struggling with a few things on this tv

I have inner panels which have a bevel on the edge and an inset.

I cant seem to get the correct topology for these inner pieces.

Attached Thumbnails
Attached Images
# 2 29-01-2014 , 04:34 PM
Sircharles's Avatar
Registered User
Join Date: Dec 2010
Location: Uk
Posts: 193
Also not sure how to get the bulge on the glass screen.

Thanks

Attached Thumbnails
# 3 29-01-2014 , 04:57 PM
Sircharles's Avatar
Registered User
Join Date: Dec 2010
Location: Uk
Posts: 193
I guess its a little difficult to understand what Im on about, but I've started to just work on the panel - without putting the bevel on the outer edge. this seems to make it a bit easier.

Attached Thumbnails
# 4 29-01-2014 , 05:40 PM
Subscriber
Join Date: Jul 2012
Posts: 112
Hehehe I know this TV from my earlier years. But it looks very great for me. Awesome, was just laughing when I realized the model of the TV ;-)
It looks very great already!!!!
The bulge maybe I would try to smooth the area and then pull it with tool settings "soft selection"???

# 5 29-01-2014 , 06:00 PM
tweetytunes's Avatar
Subscriber
Join Date: Jan 2004
Location: Bolton - UK
Posts: 2,457
Well to be fair you have modeled the area with out the curved corners and you hoping smooth mess will do the work for you. If you want a rounded edge build one not a 90' corner - then once you got the shape right you can make the insert.


# 6 29-01-2014 , 06:35 PM
tweetytunes's Avatar
Subscriber
Join Date: Jan 2004
Location: Bolton - UK
Posts: 2,457
Maybe this will help you sort it out - Normal and Smooth preview modes plus front and rear

Attached Thumbnails

# 7 29-01-2014 , 06:51 PM
tweetytunes's Avatar
Subscriber
Join Date: Jan 2004
Location: Bolton - UK
Posts: 2,457
And just to quickly finish it off - really hope it helps

Attached Thumbnails

# 8 29-01-2014 , 07:52 PM
NextDesign's Avatar
Technical Director
Join Date: Feb 2004
Posts: 2,988
You can use the soft mod tool or a sculpt deformer to create the bulge.


Imagination is more important than knowledge.
# 9 30-01-2014 , 12:25 AM
Sircharles's Avatar
Registered User
Join Date: Dec 2010
Location: Uk
Posts: 193
Thanks fellas, and tweetytunes for those examples - they really help.

I'll tackle it again tomorrow

NextDesign: not sure I've used the sculpt deformer before - I presume it pushes and pulls the points, do you go into a sculpt modeling window or something?

# 10 30-01-2014 , 12:27 AM
Sircharles's Avatar
Registered User
Join Date: Dec 2010
Location: Uk
Posts: 193
By the way, its actually very tricky to get the black panel all working.

It looks dead simple, but the panel has two parts extruded out of it, one is rounded corners for the screen the other has straight edge.

# 11 30-01-2014 , 03:06 AM
NextDesign's Avatar
Technical Director
Join Date: Feb 2004
Posts: 2,988
Hopefully you're not building it out of a single piece. Use multiple pieces, as it keeps the number of edge loops down, and you can hide the pieces you don't care about at the moment.


Imagination is more important than knowledge.
# 12 30-01-2014 , 12:31 PM
Sircharles's Avatar
Registered User
Join Date: Dec 2010
Location: Uk
Posts: 193
Ya I came to that conclusion a bit late.

# 13 30-01-2014 , 09:14 PM
Sircharles's Avatar
Registered User
Join Date: Dec 2010
Location: Uk
Posts: 193
starting to get there, rendered in cinema 4d.

Attached Thumbnails
# 14 30-01-2014 , 11:21 PM
bullet1968's Avatar
Lifetime Member
Join Date: Feb 2010
Location: Australia
Posts: 4,255
NOt bad mate. Im with ND and Tweety, a lot of people try to model in one piece, this is no good for most things. You can always join parts together....and hide them as ND said

cheers bullet


bullet1968

"A Darkness at Sethanon", a book I aspire to model some of the charcters and scenes
# 15 31-01-2014 , 09:53 PM
goggles's Avatar
Registered User
Join Date: Sep 2011
Posts: 219
You should decide if youre going to use subdivision modeling or polygonal first. If you go polygonal bevels on corners will work with high segments for better round corners in render. If you smooth bevels, since you have more than 4 sided polygons in corners it will always give you the deformed mesh result. If you go subd modeling , use 4 sided polygons 99% of the time. You can use them in areas that will not be dominant in the final render. Nobody is going to see the pinches caused by triangels or 5 sided polygons. But if you have tris or 5 sided polygons in areas that will be rigged and animated ( streched , bent or such.. ) you will have trouble.

Thinking low polygonal and drawing lines on your reference will help you understand the basic shape better. When you have the basic shape figured out, its time to add some more definition (edges). You can do this with mesh mesh > smooth. ( every polygon will be four when you smooth. in a smooth way ofc) Do not use smooth on meshes with thickness. Try smoothing planes and extruding the border edges later.

as daverave said once, "You should model the shape then define the edges." After all, everything hd has a low res structure (4/1 less geo in subd level 1 ) . Hope this helps.

cheers

Attached Thumbnails
Posting Rules Forum Rules
You may not post new threads | You may not post replies | You may not post attachments | You may not edit your posts | BB code is On | Smilies are On | [IMG] code is On | HTML code is Off

Similar Threads