Complex UV Layout in Maya
Over the last couple of years UV layout in Maya has changed for the better. In this course we're going to be taking a look at some of those changes as we UV map an entire character
# 1 22-10-2008 , 05:01 PM
erikober's Avatar
Subscriber
Join Date: Nov 2002
Location: Denver, US
Posts: 48

dynamic ribbon

Hi Rage.
Here is that new thread, user added image.

Just to reiterate, I have a gift box with a ribbon on the top lid and I am trying to simulate the box opening and then falling open with the lid w/ribbon reacting to the floor.

The art director needed to see something this morning, so I pacified him with this that is using no dynamics:

https://www.upperhouse.us/cct/cherrycreek/box1.html

I tried some other options earlier, but things weren't reacting that well.
There is one test that had some promise, but it is on a different machine and I am away currently. Basically, I was able to setup a simulation this way:

Apply 2x2x2 deform lattice to ribbon and group with box lid.

Box lid and ribbon lattice group and box bottom all selected and apply gravity to make rigid objects.

Nurbs floor set as passive object.

Simulation reacting as expected.

Then chose ribbon lattice and set as soft body and adjusted weights to hold some rigidity.

Simulation starts pretty well with the lid remaining rigid and reacting to the floor and the ribbon looking pretty good as well with some nice wiggle. Problem at the end, though. The whole boxlid group somersualts upside down which is fine, but the ribbon just collapses under the box lid rather supporting it above the floor.

That was very long winded, sorry I don't just have another vid that would be more self evident. I will try and get it posted tomorrow, if that route is even worth persuing.

Thanks again for your time.
You guys rule!!

# 2 22-10-2008 , 08:36 PM
mirek03's Avatar
Subscriber
Join Date: Feb 2006
Location: Australia
Posts: 2,752
id be looking at springs and goal weights?? if i understand the problem ?

when i think curtains, ribbons..? i think springs and goal weights, not that i know a lot about it.


take it easy and life will be easy
# 3 22-10-2008 , 10:50 PM
ragecgi's Avatar
Registered User
Join Date: Sep 2002
Location: Minnesota, USA
Posts: 3,709
Hey Eric, thanks for creating the new thread.

So, like I said as the hint before: nCloth to the rescueuser added image

Basicly, the jist is this:

As long as your bow is made of polys, you would select it, and make it an nCloth object.

Then you can use a "Transform" nConstraignt to "pin" the bottom of the bow to the lid so it doesn't come off no matter what the lid does or where it goesuser added image

Then, adjust the Nucleus node settings (WAY too many attributes to list here so read the help) to get the proper "bounce" and ribbon-like jiggle motion, etc.

Then simply make the floor a "passive" object under the nCloth menu so when the ribbon contacts the floor, it either crushes, OR, bounces softly, or slides, etc.

Whatever you want it to douser added image

It really is easier than I've made it sound here, and I will "TRY" to make a sample at work tomorrow to see if I can narrow-down the settings you might need, but really once you read the help on the Nucleus node it all becomes apparent pretty quicklyuser added image

Also, for anyone interested, Duncan Brimsmead, one of Autodesk's creators of nCloth and the Nucleus module has an AWESOME blog at the AREA at Autodesk, and his nCloth section is AWESOME:
https://area.autodesk.com/index.php/b...g_list/nCloth/


Israel "Izzy" Long
Motion and Title Design for Broadcast-Film-DS
izzylong.com
# 4 22-10-2008 , 11:32 PM
mirek03's Avatar
Subscriber
Join Date: Feb 2006
Location: Australia
Posts: 2,752
that is one cool link you put up there rage. is there any to n particles and such??


take it easy and life will be easy
# 5 23-10-2008 , 12:36 AM
gster123's Avatar
Moderator
Join Date: May 2005
Location: Manchester Uk
Posts: 6,300
I read this in the other other thread, and though of ncloth straight away!

Wouldn't you adjust the ncloth node itself to get the right properties as the neuclus node adjusts the solvers attributes, gravity, time, substeps etc etc, not the cloth properites, drag, bounce lift etc etc?

What might help out is loading up some presets and seeing if they give you a close match to what you want, this would save you time messing about with all the properties individually (they also have some help in the Notes section in the attribute editor). Then go and tweeks the settings for a final adjustment.

I watched a presentation by Jos Stam, the guy who did the maths behind the neucleus solver, he went over how the maths works to get ethe solver to work, and Its a work of genius, its a bit like "why the heck didnt I think of that" moment! Ncloth is so light he had a C window that showed the solver running in realtime with lots of interactions, he even got it to solve Pi, as its based off a spring which is then made into a circle, and the solver calculates the circle without using Pi, upping the substeps, then solves the circle to a higher degree thus giving Pi.


"No pressure, no diamonds" Thomas Carlyle

Last edited by gster123; 23-10-2008 at 01:08 AM.
# 6 23-10-2008 , 03:26 AM
mirek03's Avatar
Subscriber
Join Date: Feb 2006
Location: Australia
Posts: 2,752

had a C window that showed the solver running in realtime with lots of interactions, he even got it to solve Pi, as its based off a spring which is then made into a circle, and the solver calculates the circle without using Pi, upping the substeps, then solves the circle to a higher degree thus giving Pi


ha ?? what ?? lost me dont know about the rest of the crew.., but its more info, or not enough.., for me to understand.., i just want to be pointed to somewhere i can learn about it. im waiting for the 'maya 2009' book to come out.., as i asked.., if theres any links about that might shed some light on 'n' anything i would be greatful. i have fun playing with it but i have no idea what im doing (read a waste of time) .., despite the digi tuts tutorial???


take it easy and life will be easy
# 7 23-10-2008 , 07:25 AM
ragecgi's Avatar
Registered User
Join Date: Sep 2002
Location: Minnesota, USA
Posts: 3,709

Originally posted by mirek03
that is one cool link you put up there rage. is there any to n particles and such??

Thanksuser added image Regarding links to nParticles, I'm affraid they are still too new for any structured tutorials, or articles about them yetuser added image
However, I'm getting Maya Unl. 2009 in the next 5 weeks, so when I get it I REALLY want to dive into it, and provide some insight here at SM about it.
My favorite feature so far seems to be the ability to define "sticky" nParticles. So, it acts like liquid or sludge on a bedsheet, etc... handy for characters, etc...

Originally posted by gster123
Wouldn't you adjust the ncloth node itself to get the right properties as the neuclus node adjusts the solvers attributes, gravity, time, substeps etc etc, not the cloth properites, drag, bounce lift etc etc?

Yepuser added image But I was mainly trying to get others to read the help, as there is a wealth of information explaining how everything works, so it makes one understand how the object and the Nucleus node work together better.

What might help out is loading up some presets and seeing if they give you a close match to what you want, this would save you time messing about with all the properties individually (they also have some help in the Notes section in the attribute editor). Then go and tweeks the settings for a final adjustment.

EXACTLY!
As I remember eric, you are on 2009 correct?
Well, I assume that there are far more presets in there available to you than in my current version (I'm still on 8.5).
Assigning a preset is not a "copout" it simply allows one to get to thier targeted end-result faster.
Then like gster said, check the notes in the Attribute Editor NOTES area at the bottom of the AE, and there are usualy really helpfull notes that explain whats going on, and how to tweak it to your needsuser added image

Thanks a lot for your question eric, and thanks very much for your help mirek and gster!!

Good luck all!


Israel "Izzy" Long
Motion and Title Design for Broadcast-Film-DS
izzylong.com
# 8 23-10-2008 , 08:30 AM
ragecgi's Avatar
Registered User
Join Date: Sep 2002
Location: Minnesota, USA
Posts: 3,709


Israel "Izzy" Long
Motion and Title Design for Broadcast-Film-DS
izzylong.com
# 9 23-10-2008 , 06:47 PM
mirek03's Avatar
Subscriber
Join Date: Feb 2006
Location: Australia
Posts: 2,752


take it easy and life will be easy
Posting Rules Forum Rules
You may not post new threads | You may not post replies | You may not post attachments | You may not edit your posts | BB code is On | Smilies are On | [IMG] code is On | HTML code is Off

Similar Threads