Beer glass scene creation
This course contains a little bit of everything with modeling, UVing, texturing and dynamics in Maya, as well as compositing multilayered EXR's in Photoshop.
# 1 11-11-2010 , 02:43 PM
Subscriber
Join Date: Oct 2010
Posts: 4

Overwhelmed noob

Hello all.
I recently discovered SimplyMaya while waiting for my software package to be delivered. I bought the student version which includes :MAYA , 3DS MAX, Motion Builder, MudBox, Sketch Pro

I was using a program called AC3D prior to this. But now I am overwhelmed. I dont know where to start. I have tried following along with tutorials from here and a couple more places. A little confusing though, with the age of the tutorials and the upgrades to the software. Can someone please advise me which one of these programs I should start with and which tutorials to start with. I would very much appreciate some good advice.

Thanks for your help.

# 2 11-11-2010 , 05:42 PM
Registered User
Join Date: May 2009
Posts: 26
I'm happy to give you my best advice about feeling overwhelmed by programs like Maya. It's simple, you'll probably only end up using about one percent of what's there anyway, so just focus on learning that. It's probably different for everyone though. I make videogames with Blitz3D, so I mostly use split polygon, move vertex, merge vertexes, and the similar tools in the UV texture editor. Other than that, I use the camera tools to change to view, and the hypergraph to keep everything in the scene organized. I'm sure other people use more tools than I do, but I would assume in general most people also try to keep it to a minimum, not try to memorize the entire interface.


Last edited by fox95871; 14-11-2010 at 07:46 PM.
# 3 11-11-2010 , 06:20 PM
G-Man's Avatar
Subscriber
Join Date: May 2004
Location: Bowling Green. Kentucky U.S.A.
Posts: 810
My forte is high detail hard surface modeling. I know basically the entire Polygon and Mesh set of menu's and anything that corresponds to that set of skills( at least i do my best to, I'm sure there are some things that i have yet to discover even after this long with 3d work).
But i learned recently, that i have in some ways shot myself in the foot when it comes to presenting myself as a professional. While i am Very good at what i do. I have as well paid too much attention to one specific area.
The best advice i can give you as a freelance Graphic artist, is to yes, Pick one field you want to know through and through, be it modeling, Animation, Rendering lighting and Shading, Rigging dynamic SFX, ect. Make that choose. Then as well learn a good general overview of the rest also. At least , at the very least develop a descent understanding of Rendering, Lighting, Shading and riging with what every you do choose.

The age of hte Tutorials on Simply maya actually do not hinder you to much. you just need to know the language of the UI as its changed over the years.
What was previously called Polygon in the Polygons Menu set, is now referred to as "Mesh"...like wish what was previously referred to as Nurbs in the menu system, is now referred to as "Surfaces".. unfortunately this isn't a solid change in Maya, meaning its not a complete translation I.E. the Split polygon tool was not changed in name to the "Split Mesh " tool. But after a few hours using the program you'll be able to 'translate' this in your head no problem. Just remember if you hear Nurbs look for Nurbs and or Surfaces, and if you head Polygons look for Polygons and Mesh both ...
a few new tools have been added to modeling, since older versions, Split edge loop tool, offset edge loop tool, some like that, so you wont see them in older tutorials since they are newer functionality. There are also several different methods to achieve the same goal in Maya, you'll just have to experiment over time with which one works best for you. Sadly at this time i cannot tell you of the changes to other aspects of Maya as i am not well enough acquainted with them in older versions to speak to their changes through the years.

The help system in Maya is very intuitive as well, it will tell you everything about any tool, Google is good for this too, you can Google instructions for something you want to learn how to do if you cannot find a video tutorial here to show you.

probably the most important advice i can give you though is Not to give up, and Not feel overwhelmed. Break it into parts. if nothing else, Pick a tool, or two or three tools a day, Create some form of primitive object, and use the tool to see what effects you can have on the primitive with those tools. after a while you're start to get a feel for the program as a whole. Don't get discouraged, I've en working for ten years, with this program and i learn something new at least once a week still. Post your work on here in these forums WE will look at it, and give you our advice and share our knowledge, You've picked the best place to start learning That i assure you. The community here is the nicest and most helpful on the internet.
That being said, I look forward to seeing your work once you start posting. and if you need help feel free to ask any of us.

Welcome to Simply Maya
G-man


Follow My Business
On The Web!
Or
On Facebook!
# 4 11-11-2010 , 10:20 PM
Nilla's Avatar
Administrator
Join Date: Jun 2009
Location: Prague
Posts: 827
Sorry guys, time for another one of my long onesuser added image

I just wanted to post something here because I know the feeling you're having.
For multiple apps be a bit careful because learning to navigate the interface itself is probably the most difficult thing to do, it's one of those bumps you have to get over, and imo one of the biggest mistake you can make is start jumping between different apps before you have complete control of all fields in one. So if you've already started with Maya, you should stick with Maya, I made the huge mistake of starting with 3ds max and switching over to Maya before I understood max properly and it really slowed me down.

We've been working on this site for a year now to make the process of actually learning maya easier for people who find us and get over these initial bumps, you can't see it yet though. The new site will hopefully go up next week, one thing we'll launch is something called "Simply Shorts" which will be smaller projects under an hour and similar to the rain, snow and hdr glass we put out a few weeks back where you work on a shorter project and get a nice end result rather than a full ten hour tutorial which is a bit much to stick through for anyone new to maya and it's easy to drop out and give up halfway through.

It's also important to remember that someone who makes a tutorial has spent a lot more time on it than the 7 hours of video you see, I just finished my scene for a tutorial on lighting an exterior and I spent six days on getting just the scene to come out the way I wanted it. And lighting is the field of maya I focus on, so it's not easy for anyone. I think when you see gorgeous images in galleries you rather think that wow I could never do that than that someone put a lot of time and hard work into it.

The thing with Maya is that it does take so long to learn but it tends to go in spikes, you have periods where you feel like you're not getting anywhere followed by periods where you progress really fast so the learning curve is very steep. Also remember that you don't have to start with modeling but you could do something else first if you struggle because modeling is time consuming and with the risk of getting shot as there's a lot of good modelers on this forum I personally find it slightly dull. I've only started to build proper models in the past few months, before that I'd download other peoples (we have a resources section on this site where you can find a lot, other cg sites have them as well) and practice lighting and texturing that way if you'd rather take that route. I think that building a good model is very difficult and require huge efforts whereas if you use someone else's model and shade and light it you'll get good results a lot faster which might inspire you not to give up because you'll see that it's actually possible to make something nice without being a master at everything.

So if you stick with us for a week or two we should have updated training which will make this site so much better for new users. For learning the basics I think books are by far the best, tutorials should be used for workflows and learning techniques you can apply to your own work and get results, not to go through every single node in Maya. I've always liked Sybex, everything they've published that I've read has been great. Introduction to Maya and Mastering Maya are booth really god books to have on the side of tutorials, they contain some good text tuts as well. And remember F1 for the Maya help files, they're so useful if you get stuck on somethinguser added image

# 5 12-11-2010 , 02:26 PM
Lifetime Member
Join Date: Apr 2007
Posts: 73

my 2c worth

I became '3Dstudent' here years ago while I was studying tradition 2d Animation at college. I like to draw but I loved making a fight sequence with two 'provided' fully rigged chars - Shame I cant yet build my own but thats why I'm here. She's not close to finished but my Kunoichi WIP is better than she was yesterday, and thanks to advice from those here she will be beter tommorrow.

I dropped off the Radar for a few years after I left college... as I no longer had access to Maya. And I had a headache from trying to work it out all by myself... I then found a student copy of Maya 2008 on a suspect disk that did the rounds at College. And fell back in love with it. I like to think I'm intelligent but after six months of intense personal study I still felt- and feel today like a complete noob every time I work on something. I couldnt even come to terms with how to Model, and texture, and rig, and animate, and light, and render a SIMPLE scene. user added image I put Maya aside for awhile and fiddled with other things on that disk like Bryce 5, 3ds Max, Mudbox, Zbrush, Poser....

I would like now to firmly echo Miss_Novas advice NOT to do that. New interfaces and slightly different tool sets... Learn one and learn it well and you'll enjoy it alot more.

When I got an E-Mail out of the blue from here about the summer sale my gloomy experience with 3D Animation had 3 point lighting installed.
My advice to someone Brand New or close to, is to purchase the Apache tutorial from here, it's bloody long but I learnt more in the first hour of that tute than I had in all the time I'd wasted prior. (Once I worked out what the "Rwee key" was) - First of many Life altering moments that guys lessons have given me.

Many of the people here make me feel unworthy with the stuff they post... or just mention off hand while giving simple advice in the Newbie forum... but everyone seems to have also felt like they were banging their heads against a wall at times, and they go out of their way to prevent that misery happening to others..

GL fella user added image

# 6 12-11-2010 , 03:28 PM
Subscriber
Join Date: Oct 2010
Posts: 4
Ok, thanks for the advice so far. Be assured, I am not giving up on this. I'm in my mid 40's and cant afford to go to school. I graduated with scholarships to go to art school way back when but was not able to do so. I rediscovered my love for art when I got turned on to a cheesy program called Doga. From there I searched and downloaded several programs. I ended up buying AC3D. I have become pretty good with it. But it has its limitations and I am always in awe when I see the work that comes from Maya and such. So I decided to try it out on my own. After what I have read from you all so far, I will stick with Maya.

So I took a suggestion and imported one of my models from AC3D into Maya lastnight. I was going to work on lighting. But two of the textures do not render. I thought maybe it was because they were in PNG format while the others were in JPG. I converted the files and imported into Maya again. Still no luck. Any ideas?

BTW, here is a sample of one of my latest works on Deviantart.

sample

# 7 14-11-2010 , 06:53 PM
Registered User
Join Date: May 2009
Posts: 26
I live in a town where I'm always having to tell people, "Don't be so miserable, just learn 3d modeling and game programming and you'll be happy again!" But with most people, it's like they don't even hear me. You're at least passed that, and know how great all this stuff is. Don't worry about the overwhelm. As long as you always do a little bit a day, and take a break on Sundays, you'll be fine. I see from your picture that you also seem to be motivated to create places and stories. In that case, I recommend you also learn Blitz3D. It's much better to explore places and be a part of stories than it is to just see them in still images. Also, by learning Maya and something else, you'll actually lessen the sense of overwhelm because having something else to fall back on has about the same effect as a Sunday. Here's some information about Blitz3D.

https://blitzbasic.com/Products/blitz3d.php


Last edited by fox95871; 14-11-2010 at 07:54 PM.
# 8 14-11-2010 , 11:11 PM
Nilla's Avatar
Administrator
Join Date: Jun 2009
Location: Prague
Posts: 827
Dzemo, that's a cool looking scene, nice work. I like the overall feel. For things not showing up in your renders the most commonly made mistakes are to use mental ray materials and try to render them in maya software which is not capable of doing it as they're more complicated and have to be calculated in mental ray itself. The second thing is to delete the connection between a material and the shading group which connects to the geometry. In this case you end up with black or green shaded geometry in the viewport and nothing shows up in your renders. When you have a lot of materials in Hypershade it's best to delete things by going edit>delete unused nodes because it saves you the potential problem of getting geometry with no shader assigned to it.

If you do get the shader up but just not the textures I can't really tell you what's wrong but the best way to find out is to run render diagnostics in the script editor. If you open the render view window and click on the icon to the far right maya should tell you why your textures don't show up. It's a good idea to run render diagnostics on any scene because you'll pick up some useful tips on how to optimize your scene and sometimes it might have problems you didn't notice.

I also really like that apache tutorial, though it is 19 hours of solid modelinguser added image Another great tutorial of similar caliber is the Ferrari, it's also done in maya 6 but the techniques remain exactly the same mental ray just got a bit speedier. Cartoon modeling is less detailed though so if you get stuck on realistic organics model the Haunted House. I'm also a fan of Jason Edwards, his work is great and he pays attention to a lot of things other people do not in modeling. His Chef Ramsay tutorial is great and it's newer so would work well if you'd struggle getting around the interface.

Posting Rules Forum Rules
You may not post new threads | You may not post replies | You may not post attachments | You may not edit your posts | BB code is On | Smilies are On | [IMG] code is On | HTML code is Off

Similar Threads