Introduction to Maya - Modeling Fundamentals Vol 2
This course will look in the fundamentals of modeling in Maya with an emphasis on creating good topology. It's aimed at people that have some modeling experience in Maya but are having trouble with complex objects.
# 1 14-11-2002 , 09:22 PM
erikober's Avatar
Subscriber
Join Date: Nov 2002
Location: Denver, US
Posts: 48

Capping a closed path that is extruded

What is the least convoluted method to close the open end of a closed or periodic curve that has been extruded? I know I can drop a shape at the end, intersect and then use the trim tool, but it seems there must be a quicker way. Also this method seems plagued if the open end is not perpindicular to x,y,z, but you want the cap to be perpindicular to the open end.

thanks!

# 2 14-11-2002 , 09:25 PM
mtmckinley's Avatar
The Maya Mountain
Join Date: Aug 2002
Location: Seattle, WA
Posts: 8,245
I usually insert an isoparm at the end of the surface and then scale in the last Hull... there's a thread going over this somewhere that I had attached an image... maybe I can find it. user added image

# 3 14-11-2002 , 09:50 PM
erikober's Avatar
Subscriber
Join Date: Nov 2002
Location: Denver, US
Posts: 48
Thanks for the reply. However I'm having problems understanding your method. It seems scaling any of the hulls wouldn't get the desired effect. Enclosed is how I'm understanding your instruction.

# 4 14-11-2002 , 09:54 PM
mtmckinley's Avatar
The Maya Mountain
Join Date: Aug 2002
Location: Seattle, WA
Posts: 8,245
Here's what I mean:

# 5 15-11-2002 , 12:08 AM
3djoe's Avatar
Subscriber
Join Date: Nov 2002
Location: CT USA
Posts: 567
I beleive you would select an isoparm and select make planeruser added image

# 6 15-11-2002 , 03:50 AM
erikober's Avatar
Subscriber
Join Date: Nov 2002
Location: Denver, US
Posts: 48
Thanks mtmckinley, I got it!! 3DJoe, I'm not finding "make planar". Where might that be?

Thanks.

# 7 15-11-2002 , 03:52 AM
undseth's Avatar
Subscriber
Join Date: Aug 2002
Posts: 1,135
Nurbs?
Its under "surfaces" --> "planar"


I do not support Bush! Nor Saddam! Long live UN!
# 8 15-11-2002 , 03:55 AM
undseth's Avatar
Subscriber
Join Date: Aug 2002
Posts: 1,135
If the curve for some reason isnt planar in the first place you can
1 duplicate a curve and scale it innwards a bit
2 then loft it
3 and... with history button on from the start select inner-curve and scale it to 0.

I sometimes do this, but I dont like it.


I do not support Bush! Nor Saddam! Long live UN!
# 9 15-11-2002 , 04:20 AM
erikober's Avatar
Subscriber
Join Date: Nov 2002
Location: Denver, US
Posts: 48
Wow. Planar worked great! Thanks a lot guys! This is a great site!

# 10 15-11-2002 , 04:26 AM
mtmckinley's Avatar
The Maya Mountain
Join Date: Aug 2002
Location: Seattle, WA
Posts: 8,245
yeah, planar works if you don't plan on animating that surface. be careful with deforming. user added image

# 11 15-11-2002 , 04:42 AM
erikober's Avatar
Subscriber
Join Date: Nov 2002
Location: Denver, US
Posts: 48
mtmckinley, you've sparked another question user added image About not being able to animate the surface, I can visualize the situation being cleaner when animating the tube and there isn't the planar object to deal with, but I'm curious if there isn't a way to group that new object or make it a child and still do some animating.

# 12 17-11-2002 , 12:03 AM
mtmckinley's Avatar
The Maya Mountain
Join Date: Aug 2002
Location: Seattle, WA
Posts: 8,245
planar should work fine as long as you do not deform it. If you're wanting some the end of the extrude with the planar cap to bend or something, you may find gaps appear.

# 13 17-11-2002 , 12:14 AM
BabyDuck's Avatar
Subscriber
Join Date: Nov 2002
Location: USA
Posts: 1,170
so that is the reason, nurbs are not easy to handle? need to try everything til i find the cap-cylinder-the-mtmckinley-way-button user added image

# 14 17-11-2002 , 12:22 AM
undseth's Avatar
Subscriber
Join Date: Aug 2002
Posts: 1,135
The difference between adding a planar or lofted end-surface on the sylinder, and mtmkinleys way, is that mtmckinley uses the cylinder-surface itself to cap itself.

This works great with "linear-surfaces" I guess. If the cylinder surface was made with 3. degree lofting, then adding only one ekstra isoparm, would likely produce a rounded edge around the cap-surface.


I do not support Bush! Nor Saddam! Long live UN!
# 15 17-11-2002 , 07:14 AM
erikober's Avatar
Subscriber
Join Date: Nov 2002
Location: Denver, US
Posts: 48
thanks again!

Posting Rules Forum Rules
You may not post new threads | You may not post replies | You may not post attachments | You may not edit your posts | BB code is On | Smilies are On | [IMG] code is On | HTML code is Off

Similar Threads