Substance Painter
In this start to finish texturing project within Substance Painter we cover all the techniques you need to texture the robot character.
# 1 02-02-2012 , 01:57 PM
cgisoul's Avatar
Lifetime Member
Join Date: Apr 2011
Posts: 258

Help / Suggestion - Character Rigging & Walk Cycle in Maya

Hello there,

I'm trying to learn Rigging / Animation and tried the Surfing with the Alien Vol.3. However, after watching the first few videos, I am just not in that level yet since the training was made for Intermediate users and I'm a complete newbie in this user added image

I'm glad to find the Character Rigging & Walk Cycle in Maya training here that is aimed for complete beginners. Just one problem though, the video training starts with a character free from riggs / bones / joints, etc, and when I opened the file that came with the training, the mesh is all rigged and has no materials applied as you can see in the picture below.

user added image

In the blind side, I deleted "all" the joints as I am aware of and selected all Translate / Rotate / Scale in the Layer Editor and unlock the gray pivot. It took me sometime to figure that one out.

Just a suggestion, could Simplymaya provide a clean mesh with textures as shown in the videos of this training? So whoever download this tutorial doesn't find the same problem I had.

Thank you user added image Appreciated for any help guys / girls.


Last edited by cgisoul; 02-02-2012 at 02:15 PM. Reason: Update
# 2 02-02-2012 , 04:57 PM
Jay's Avatar
Lead Modeler - Framestore
Join Date: Feb 2003
Location: UK
Posts: 6,287
Dude we should be able to sort that once David is back. He is currently AOM.....but I will let him know.

Yeah intermediate on Volume 3 not beginner

Jay

# 3 03-02-2012 , 03:23 AM
cgisoul's Avatar
Lifetime Member
Join Date: Apr 2011
Posts: 258
Hey Jay,

Thanks mate.

No hard feelings mate, I am just a complete noob when it comes to rigging / animation. You are a good Trainer as you did with vol.1 and 2, but I just need to understand more about the whys, ins and outs of grouping joints and Vol.3 is towards for intermediate that requires some already understanding about rigging. Yiap, I found it hard user added image user added image ! user added imageuser added imageuser added image

I might take this chance to ask, why do you group and re-group then regroup again, then re-group again the joints? Okay, this is a complete noob question, someone who know nothing about rig and starting. user added image

Don't get me wrong, I think vol.3 is packed with awesome information even for my little understanding about rigging and I'm sure will get back to it once I know more the foundation stuff.

Thanks mate.
Miguel

# 4 03-02-2012 , 07:02 AM
bullet1968's Avatar
Lifetime Member
Join Date: Feb 2010
Location: Australia
Posts: 4,255
I havent seen the Alien one yet...watched parts of it....I followed it ok..though I wasnt actually doing it. Kurts is a lot less taxing on the brain for sure....LOL at least you have a choice mate...I have to do Jays whether I like it or not...boy its going to hurt. Good luck with it man!

cheers bullet


bullet1968

"A Darkness at Sethanon", a book I aspire to model some of the charcters and scenes
# 5 03-02-2012 , 07:29 AM
cgisoul's Avatar
Lifetime Member
Join Date: Apr 2011
Posts: 258
Hi bullet,

Go with the Surfing vol.1 and vol.2. I loved it and paved me with tons of info that helped create my latest Alien Nano. Jay has really done an awesome job. But the vol.3 is some how a bit hardcore for someone who never rigged anything! user added image I will for sure go back to Vol.3 once I get the foundation sorted.
I love the Surfing with the Alien serie. Hope Jay will come up with more tuts similar to that.

# 6 03-02-2012 , 10:04 AM
Jay's Avatar
Lead Modeler - Framestore
Join Date: Feb 2003
Location: UK
Posts: 6,287
Oh no hard feelings with that at all. We just felt the need to give you everything to finsih a character off.

Its not actually that hard when you break it down slowly. If you have do go through it slowly, rewind and do it again.

Groups on groups on groups.....yeah depends sometimes you can use them for controlling rotations independent to the actual joints. If its not explained in the tute why he has done it then that worries me...because you arent learning from it. My rig is pure joint chain hierachies....joint to joint and then control handles added after.

The next tute will be out soon...I'm working long days at the moment so motivation is hard coming home 9 -10 at night and then doing the tute. So it takes longer. However after its finished there'll be another on its way.........which is awsome...Ive already started prep work

Jay

# 7 03-02-2012 , 10:10 AM
bullet1968's Avatar
Lifetime Member
Join Date: Feb 2010
Location: Australia
Posts: 4,255
LOL dont worry cg I had NEVER doen any rigging..trust me on that one. As Jay said...slow and easy mate....forget a bit..rewind. I have got into the habit of modelling AND writing it down...sadly I left my book in Perth...1800 km away LOL. You will get there mate...doesnt happen in an instant.

cheers bullet


bullet1968

"A Darkness at Sethanon", a book I aspire to model some of the charcters and scenes
# 8 03-02-2012 , 12:22 PM
cgisoul's Avatar
Lifetime Member
Join Date: Apr 2011
Posts: 258
Hey bullet,

Perth??? I lived there for 4 years while I was attending Curtin University around year 2000.
Ahhh you just brought back some long forgotten memories... damn good.
Well I guess we are together on this one mate! Oz oz oz Oi Oi Oi! user added image

# 9 03-02-2012 , 12:25 PM
cgisoul's Avatar
Lifetime Member
Join Date: Apr 2011
Posts: 258
Hey Jay, any chance to spill some beans out and sneak peak? You are killing me with all this secrecy!!
Is it a Character work? Interior work? Magic bloody Wizard raising a magic wand? Kick ass looking Sword?
Man.... spill some beans please... user added image Damn it, I need a cigarette.

# 10 03-02-2012 , 01:29 PM
Jay's Avatar
Lead Modeler - Framestore
Join Date: Feb 2003
Location: UK
Posts: 6,287
hahahahaa

go have a ciggy...Im not telling you anything....you'll have to wait like everyone else

J

# 11 03-02-2012 , 02:06 PM
# 12 03-02-2012 , 03:54 PM
cgisoul's Avatar
Lifetime Member
Join Date: Apr 2011
Posts: 258

A new issue with Maya 2012

I don't seem to be able to rotate the axis with the rotate pivot on.
This is the last step before working with the weights painting...

Video showing the problem at https://www.mduque.com/maya/qs/q1/issue.html

Jay or any expert out there who can help out?

Thank you.

# 13 04-02-2012 , 12:21 AM
bullet1968's Avatar
Lifetime Member
Join Date: Feb 2010
Location: Australia
Posts: 4,255
LOL yeh Perth is probably the cleanest and prettiest city in Australia...its supposedly boring too LOL not upbeat like Sydney or Melbourne..not that us West Aussies give a shit about the Eastern states.

There is a little trick to getting that to point up in the Y axis...I will go through Kurts tut and post soon mate.

cheers bullet


bullet1968

"A Darkness at Sethanon", a book I aspire to model some of the charcters and scenes
# 14 04-02-2012 , 12:36 AM
bullet1968's Avatar
Lifetime Member
Join Date: Feb 2010
Location: Australia
Posts: 4,255
Ok mate....its in the Character Rigging ans Walk Cycle tutorial by Kurt...Part 2 and about the 5 minute mark

cheers bullet


bullet1968

"A Darkness at Sethanon", a book I aspire to model some of the charcters and scenes
# 15 04-02-2012 , 07:13 AM
Subscriber
Join Date: Aug 2005
Location: Austin, TX
Posts: 496

Posting Rules Forum Rules
You may not post new threads | You may not post replies | You may not post attachments | You may not edit your posts | BB code is On | Smilies are On | [IMG] code is On | HTML code is Off

Similar Threads