Introduction to Maya - Modeling Fundamentals Vol 2
This course will look in the fundamentals of modeling in Maya with an emphasis on creating good topology. It's aimed at people that have some modeling experience in Maya but are having trouble with complex objects.
# 31 30-08-2006 , 09:52 PM
Lt Jim's Avatar
Subscriber
Join Date: Sep 2004
Location: Queens, New York City
Posts: 367
OK, time for an update! I decided to take a break from character animation and do the engines on the airship. As you can tell, it wasn't exactly a cakewalk! The picture I posted above was the ONLY close-up photo of the unique outrigger engines on the USS Akron/Macon I could find.

I obviously had to make concessions mainly because I wasn't exactly sure of WHAT detail existed in the photo, but IMO the final engine is "close enough for government work"! :-)

The engines were the most difficult part thus far; other than the UV mapping and texturing, it ought to be downhill from here! Here then are a couple of pictures. The first shows portside engines in succession. As always, comments and crits welcome (again, it isn't textured yet, and I haven't even played with the lighting, but suggestions are welcome)

Attached Thumbnails

"Ad astra per aspera..."
# 32 30-08-2006 , 09:53 PM
Lt Jim's Avatar
Subscriber
Join Date: Sep 2004
Location: Queens, New York City
Posts: 367
One more picture: A close up of one of the engines. Thanks again to all who have visited this thread!

Attached Thumbnails

"Ad astra per aspera..."
# 33 31-08-2006 , 05:44 PM
Lt Jim's Avatar
Subscriber
Join Date: Sep 2004
Location: Queens, New York City
Posts: 367
Next up are the windows in the hull along the double keel. This is turning out to be quite tedious indeed! Each window has to be done individually. To get the window geometry, I used the "cut faces" tool to add faces and then extruded them individually. Because the windows are at an angle, extruding isn't just a matter of point n' click!

After extruding a window on one side, I managed to "eyeball" a symmetrical window on the other using "x-ray".

After extruding the windows into the hull, I beveled them. As tedious as it is, the addition of windows gives the model a nearly "finished" effect! Pictures will be up soon. I expect to find the time to finish this in a week or two!

BTW if anyone knows of an easier way to do windows on such a model, let me know! I tried Booleans, the "make a hole" tool, &c &c before settling for the good ol' tedious "extrude face". Surely there must be a quicker way! :-)

Carry on...


"Ad astra per aspera..."
# 34 31-08-2006 , 07:43 PM
Lt Jim's Avatar
Subscriber
Join Date: Sep 2004
Location: Queens, New York City
Posts: 367
I guess the windows didn't take that long after all! (I turned off the "keep faces together" option, and I got ALL of my windows in one pass!)

Here are two pictures. PLEASE excuse the half-baked lighting, I haven't even begun to work on it yet! :-)

The first shows the airship with the hull windows in place. It already looks "finished" from a distance!

Attached Thumbnails

"Ad astra per aspera..."
# 35 31-08-2006 , 07:45 PM
Lt Jim's Avatar
Subscriber
Join Date: Sep 2004
Location: Queens, New York City
Posts: 367
The second picture shows the windows closer up. I do have a few small details to add so that it more closely resembles the photo I posted earlier in this thread.

Up next, the "small details", the "skyhook" trapeze mechanism (and the hull hatch), and...we're done! :-) (Oh, yes...texturing, &c)...

Attached Thumbnails

"Ad astra per aspera..."
# 36 31-08-2006 , 11:38 PM
Subscriber
Join Date: Apr 2004
Location: Bonny Scotland!
Posts: 116
Hey Jim, looking good mate especially the last image showing the detail you've put into the rotor mounts.

Is this a modeling exersize for the reel or do you have plans to animate it etc?

Cheers

Jaime.

# 37 01-09-2006 , 12:28 AM
gster123's Avatar
Moderator
Join Date: May 2005
Location: Manchester Uk
Posts: 6,300
This is really coming along nicely!

Good work!

# 38 01-09-2006 , 09:05 AM
Lt Jim's Avatar
Subscriber
Join Date: Sep 2004
Location: Queens, New York City
Posts: 367
Thanks, gster & Jamie! A bit of both, really. It will be on my reel, but probably as an animated object (I guess it will be pretty obvious I modelled it, too! :-) )

I just finished the tail details (this calss of airship had auxilliary control surfaces mounted to the elevators & rudders). Now I have to do bracing wire and those assorted little protrusions, rings, &c. I'm also working on the hangar bay hatch (which would be underneath the ship).

Here's a pic of the tail. Overall, construction is going more quickly than I thought, but texturing is going to take some time!

Attached Thumbnails

"Ad astra per aspera..."
# 39 01-09-2006 , 09:12 AM
Mark Rodgers's Avatar
Registered User
Join Date: Mar 2005
Location: Spain
Posts: 26
WOW! user added image Now this is a cool piece of engine!! keep going on it looks fantastic, can't wait to see the finished version of it


Mark R.
# 40 01-09-2006 , 03:05 PM
Lt Jim's Avatar
Subscriber
Join Date: Sep 2004
Location: Queens, New York City
Posts: 367
OK, other than a few VERY minor details (which I can add any ol' time), the airship is basically finished! When it's textured, I will post it in "Finished Work".

The final updates include the gas vents along the top of the ship, some wire bracing, and (THIS was the FUN part) the hangar hatch/trapeze mechanism.

The hatch automatically opens (via blend shape), and the trapeze unfolds into position (SDK) to launch and/or recover aircraft. There will be cables added to the trapeze at some point, but right now I'm leaving it until everything's textured. I slapped a cheesy sky background and tweaked the lights I had up (again, nowhere near how I'd light a scene, but OK for now) and took a few more snapshots!

Thanks for letting me share this fun side-project with you, and enjoy your flight!

Attached Thumbnails

"Ad astra per aspera..."
# 41 01-09-2006 , 03:06 PM
Lt Jim's Avatar
Subscriber
Join Date: Sep 2004
Location: Queens, New York City
Posts: 367
Here's a shot of the gas vents

Attached Thumbnails

"Ad astra per aspera..."
# 42 01-09-2006 , 03:07 PM
Lt Jim's Avatar
Subscriber
Join Date: Sep 2004
Location: Queens, New York City
Posts: 367
Here's a shot of the open hatch and trapeze launcher

Attached Thumbnails

"Ad astra per aspera..."
# 43 01-09-2006 , 03:08 PM
Lt Jim's Avatar
Subscriber
Join Date: Sep 2004
Location: Queens, New York City
Posts: 367
And one more! Thanks again, everyone!

Attached Thumbnails

"Ad astra per aspera..."
# 44 02-09-2006 , 05:54 AM
arran's Avatar
Registered User
Join Date: Dec 2005
Location: Brooklyn, NY
Posts: 3,708
excellent work Lt Jim! Well done mate. user added image

# 45 02-09-2006 , 09:54 PM
Subscriber
Join Date: Feb 2006
Posts: 1,937
ahaha jim you pro... love what your doing, keep it up mate =]

Posting Rules Forum Rules
You may not post new threads | You may not post replies | You may not post attachments | You may not edit your posts | BB code is On | Smilies are On | [IMG] code is On | HTML code is Off

Similar Threads