Substance Painter
In this start to finish texturing project within Substance Painter we cover all the techniques you need to texture the robot character.
# 16 19-11-2012 , 02:56 AM
Acid44
Guest
Posts: n/a
Here are a few sites I found with refs for an evo IX. Don't worry about the exact model, you can pretty easily tell with bits aren't supposed to be on the one you're doing user added image

https://www.netcarshow.com/mitsubishi...olution_ix_se/

https://www.netcarshow.com/mitsubishi..._evolution_ix/
^search that one for other models of the EvoIX as well, they should have tons.

https://www.sportsnimports.com/board/...trunk-lip.html

https://forums.evolutionm.net/sale-pa...lots-more.html

https://www.motorstown.com/43459-mits...evo-ix-rs.html

Google has quite a few aswell, just put in "Lancer Evo IX" and set size to large. If you set it to one of the "larger than:" sizes, you'll typically get more specific shots the higher up you go in size. That how I usually get the detailed refs for headlights and such

Oh, and post a wireframe user added image

# 17 19-11-2012 , 03:02 PM
twisteddragon33's Avatar
Registered User
Join Date: Apr 2003
Location: New York, USA
Posts: 1,945
Thanks for the help, I will post a wire when i get home.

I was using google images to search for larger images but i was having trouble finding any of a good angle. I didnt look as hard as i should have though. Seems like everyone wants a photo of their lancer in the same angle.

I did figure out i had the position of a lot of things along the side of the car wrong because i misinterpreted the references/blues. So i had to scrap most of that and redo it, but came together a lot cleaner this time.


________________________
AIM: SublimeDragon33
Catch me if i'm on. Always up for a chat.
e-mail: sublimedragon33@gmail.com
# 18 19-11-2012 , 05:58 PM
Acid44
Guest
Posts: n/a
Yeh, it's hard to find pictures of any car that aren't from a low angle of the front/left, or rear/right. :p

# 19 20-11-2012 , 02:29 PM
twisteddragon33's Avatar
Registered User
Join Date: Apr 2003
Location: New York, USA
Posts: 1,945
I agree. Usually when you get one with a decent close up it is usually of an aftermarket part.


________________________
AIM: SublimeDragon33
Catch me if i'm on. Always up for a chat.
e-mail: sublimedragon33@gmail.com
# 20 20-11-2012 , 06:04 PM
Acid44
Guest
Posts: n/a
Yeh. Sometimes that works out well though, makes it pretty easy to find refs for the hood, since a lot of people make carbon fibre hoods. Sometimes you can also find forum threads on people doing repairs and stuff too, so you can get decent refs or random bits :p

# 21 21-11-2012 , 12:03 AM
twisteddragon33's Avatar
Registered User
Join Date: Apr 2003
Location: New York, USA
Posts: 1,945
I ended up getting great references for my Celica i made from an auto repair website that had a mildy damaged(scratches and dings) celica they were talking about how they repaired with pics included.


________________________
AIM: SublimeDragon33
Catch me if i'm on. Always up for a chat.
e-mail: sublimedragon33@gmail.com
# 22 21-11-2012 , 05:40 AM
Acid44
Guest
Posts: n/a
Those types of things are pure gold. Especially with cars like the Evo/Skylines/Celicas, and other Japanese cars that are upgraded by everyone. I got most of my KPGC10 refs from tuner sites and stuff, ended up with a lot of really nice close up shots of almost every part.

# 23 11-03-2013 , 12:19 AM
twisteddragon33's Avatar
Registered User
Join Date: Apr 2003
Location: New York, USA
Posts: 1,945
Although incredibly delayed i had some free time to work on this again and here is the wire! only a few month delay.

Attached Thumbnails

________________________
AIM: SublimeDragon33
Catch me if i'm on. Always up for a chat.
e-mail: sublimedragon33@gmail.com
# 24 21-04-2013 , 05:56 PM
twisteddragon33's Avatar
Registered User
Join Date: Apr 2003
Location: New York, USA
Posts: 1,945
Final render.

Dont have a lot of time to tinker with maya but i just wanted to finish this project so took some shortcuts near the end. Still like how it came out though.

Attached Thumbnails

________________________
AIM: SublimeDragon33
Catch me if i'm on. Always up for a chat.
e-mail: sublimedragon33@gmail.com
# 25 22-04-2013 , 06:04 PM
murambi's Avatar
Head of 3d Admedia
Join Date: May 2007
Location: nairobi , ken-ya
Posts: 1,340
Solid modeling but that render needs alot of work you could use hdri light software If you want to create a studio render or search for free hdri images to mess with to light your model

# 26 27-04-2013 , 02:09 AM
twisteddragon33's Avatar
Registered User
Join Date: Apr 2003
Location: New York, USA
Posts: 1,945
I really only did anything with the render just to show something. I have very little interest in lighting and rendering. I prefer modeling only. That is why i usually give my files to I-Iybrid because he likes to texture and render.

This car was very uniquely challenging from other cars i have made because of its unusual curves and lines but very rewarding when complete.


________________________
AIM: SublimeDragon33
Catch me if i'm on. Always up for a chat.
e-mail: sublimedragon33@gmail.com
Posting Rules Forum Rules
You may not post new threads | You may not post replies | You may not post attachments | You may not edit your posts | BB code is On | Smilies are On | [IMG] code is On | HTML code is Off

Similar Threads